ANY SPOT SPOT ® SERIES WIRELESS MICROPHONE SYSTEMS AS-M500 AND AS-M700 SERIES UHF BAND GA LAX Y AU D I O MAKERS OF THE ORIGINAL HOT SPOT PERSONAL MONITOR
ANY SPOT WIRELESS MICROPHONE SYSTEMS 1. Introduction ………………………………………….……….……….…… 1 2. Safety ………………………………………………………………………… 1 3. Environment ………………………………………………………………... 1 4. Wireless Note……………………………………………….……………... 1 5. Product Description ………………………………..………….………..… 2 5.1 Diversity Type Receiver 5.2 Handheld Microphone 5.3 Bodypack Transmitter 6. Basic Connections……………….…………………..……….…..……..… 10 7. Setting Up ………………………………………………….………...…… 12 7.1 Connecting the receiver to power 7.
ANY SPOT WIRELESS NOTE FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. Notice : The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
ANY SPOT PRODUCT DESCRIPTION 5. Product Description 5.1 Diversity Type Receiver Stationary diversity receivers are used with all 64 or 700 selectable channel transmitters. The receivers operate on UHF band frequencies with PLL synthesizer control and are powered by 12V DC.
ANY SPOT PRODUCT DESCRIPTION AS –M700R 700 Channel, Diversity, 1/2 Rack, Detachable Antenna AS-M700R GA LAX Y AU D I O ANY SP O T AS-M700R POWER HEADPHONE VOLUME CHANNEL MIN MAX POWER VOLUME CHANNEL FREQ VOLUME CHANNEL UHF RECEIVER RF RF ANY SPOT UHF RECEIVER 1 3 2 4 5 ANT B TRUE DIVERSITY VOL MHz 7 6 AF DC OUT DC OUT AF 8 9 10 11 ANT A AUDIO OUTPUT UNBALANCED SQUELCH LINE DC ONLY 12V 1A MIC DC OUT 8V/80mA DC OUT 8V/80mA BALANCED 12 13 14 15 16 17 12 1.
ANY SPOT PRODUCT DESCRIPTION Rack Mounting Combine two receivers in a 19” standard rack by using 2 short L type metal rack ears (AS-SRE) and 2 metal connecting plates (AS-CP). (Each system includes an AS-SRE and a AS-CP.) AS-SRE AS-CP Mount a receiver in a 19” standard rack by using 2 L type long metal racks (AS-LRE). (each system includes a pair of AS-LRE.
ANY SPOT PRODUCT DESCRIPTION Charging Connection Diagram To charge rechargeable batteries, connect the supplied charger cable to the receiver and a microphone or belt pak transmitter. Make sure that the transmitter’s power switch is in the “off” position. The LED on the 500 series transmitters will flash during charging. The “BATT” indicator on the 700 series transmitters will pulse during charging. Charging can take up to 10 hours. Never connect more than one transmitter to the charging connection.
ANY SPOT PRODUCT DESCRIPTION 5.2 Handheld Microphone The handheld microphone operates on UHF band frequencies with PLL synthesized control. 64 (AS-HH5) or 700 (AS-HH7) preprogrammed selectable UHF frequencies are provided to avoid interference. The AS-HH5 is equipped with a uni-directional dynamic cartridge. The AS-HH7 is equipped with a uni-directional electret condenser cartridge. Power is supplied by two 1.5V AA size batteries. AS-HH5 1 2 3 4 7 5 6 8 6 1.
ANY SPOT AS-HH7 PRODUCT DESCRIPTION 1 2 3 4 CH CH 5 6 7 8 10 9 1. Grille: Protects the microphone capsule and helps reduce breath sounds and wind noise. 2. Programmable Display: Displays the channel number and battery power level 3. On/off Switch: Turns the transmitter power on and off. 4. Channel Button: Press this button to adjust the channel upward. 5. Channel Button: Press this button to adjust the channel downward. 6.
ANY SPOT PRODUCT DESCRIPTION 5.3 Bodypack Transmitter AS-MBP5 The bodypack transmitter operates on UHF band frequencies with PLL synthesized control. 64 preprogrammed selectable UHF frequencies are provided to avoid interference. Power is supplied by two 1.5V AA size batteries. 5 1 2 4 3 9 6 10 8 1 2 7 3 6 5 4 1 2 3 5 4 CHANNEL AA BATTERY 7 6 AA BATTERY GROUP 8 7 GAIN 8 CHARGING INPUT 1. Mini XLR connector: Input connection for a microphone or instrument cable. 2.
ANY SPOT PRODUCT DESCRIPTION AS-MBP7 The bodypack transmitter operates on UHF band frequencies with PLL synthesized control. 700 preprogrammed selectable UHF frequencies are provided to avoid interference. Power is supplied by two1.5V AA size batteries. 2 1 3 4 8 CHARGING INPUT 5 6 AA BATTERY 10 7 AA BATTERY 9 1. On/Off Switch: Turns transmitter power on and off. 2. Mini XLR Connector: Input connection for a microphone or instrument cable. 3. Antenna: Permanently connected, helical antenna.
ANY SPOT BASIC CONNECTIONS 6. Basic Connections Connect the receiver output to the audio mixer or amplifier input, using a standard audio cables with 3-pin XLR connectors or ¼” (6.3mm) phone plugs. Never use the balanced and unbalanced audio outputs at the same time! This may cause signal loss or increased noise.
ANY SPOT BASIC CONNECTIONS An antenna booster is highly recommended for long-distance purposes, such as in a stadium or in an auditorium. By means of the antenna holders, the antennas and booster can be put wherever you want. It is an ideal design for multi-channel applications. Antenna boosters can be used with receivers that have detachable antennas. The antenna holder makes it easy to place the antenna wherever it needs to be in relation to the receiver.
ANY SPOT SETTING UP 7. Setting Up NOTICE: Prior to setting up, check that the transmitter and receiver are tuned to the same frequency. Two or more transmitters operating on the same frequency can not be used at the same time in the same place, so please select different frequencies which can be used simultaneously in the same place. 7.1 Connecting the receiver to power Ø Plug the antennas into the TNC sockets on the receiver and point them upward.
ANY SPOT SETTING UP 7.3 Inserting batteries into the handheld microphone / bodypack transmitter Ø Open the battery cover and insert batteries into the battery compartment conforming to the polarity (+)(-) marks. The transmitter can not work with incorrectly inserted batteries. Ø AS-MBP5/AS-HH5 Push the ON/OFF switch to “ON” to switch the power on. The LED will flash momentarily. If the batteries have sufficient power, the LED flashes only once.
ANY SPOT TROUBLE SHOOTING 8. Trouble-shooting Problem Solution No sound Ø Check the power supply of the microphone and receiver. Ø Check that the transmitter and receiver are tuned to the same frequency. Ø Check whether the mixer or amp is switched on and the receiver output is connected to the audio mixer or amplifier input. Ø Check whether the transmitter is too far away from the receiver or if the SQUELCH control is set too high.
ANY SPOT FEATURES & SPECIFICATIONS 9. System Features Ø The flexibility and the professional performance of these wireless systems are specifically designed for stages, places of worship, and professional sound installations. Ø The wireless microphone system with 64 (ASM-500) or 700 (ASM-700) selectable frequencies via Phase Locked Loop (PLL) circuitry makes it easy to choose non-interfering channels. Ø System offers super high sensitivity and extremely low noise transmission and reception.
ANY SPOT FEATURES & SPECIFICATIONS MS-700R Receiver Ø Carrier Frequency Range Ø Oscillator Ø Modulation Ø Frequency Stability Ø S/N ratio Ø Maximum Deviation Ø Image and Spurious Rejection Ø Receiving Sensitivity Ø Selectivity Ø AF Response Ø T.H.D. Ø IF Frequency Ø Dynamic Range Ø Tone Signal Ø Audio Output Ø Power Supply Ø Current Consumption : UHF band 630~660MHz : PLL synthesized : FM :± 0.005% : >94dB, at 48KHz deviation and 60dBµV antenna input :± 48KHz : 80 dB minimum : 6 dB µV.
ANY SPOT ACCESSORIES ANY SPOT CASE FOR MICS AS-CASEMIC Holds 1 rack mount receiver, body pack transmitter or handheld microphone, and accessories. DC CHARGER AS-DCC (X) 5 DC charger will charge up to 5 AS-1000R or other DC chargeable units from Galaxy including AS-MBP5, AS-MBP7, AS-HH5, & AS-HH7 5 charging cables included.
ANY SPOT 18 NOTES UHF WIRELESS MICROPHONE
ONE YEAR LIMITED WARRANTY This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. This warranty is extended to the purchaser and to any purchaser from him/her for value. GALAXY AUDIO warrants the materials and workmanship of its products for a period of one year from the date of the original purchase. The following are not covered by the warranty: 1. Damage to or deterioration of the exterior cabinet which occurs after delivery. 2.
ANY SPOT SPOT ® SERIES WIRELESS MICROPHONE SYSTEM UHF BAND AS-M500 AND AS-M700 SERIES GA LAX Y AU D I O MAKERS OF THE ORIGINAL HOT SPOT PERSONAL MONITOR 601 E. Pawnee Wichita, KS 67211 316.263.2852 FAX 316.263.0642 www.galaxyaudio.
