User Manual

TROUBLE SHOOTING
ANY SPOT
8. Trouble-shooting
14 WIRELESS MICROPHONE
UHF
Problem Solution
No sound Ø Check the power supply of the microphone and receiver.
Ø Check that the transmitter and receiver are tuned to the same
frequency.
Ø Check whether the mixer or amp is switched on and the receiver
output is connected to the audio mixer or amplifier input.
Ø Check whether the transmitter is too far away from the receiver or
if the SQUELCH control is set too high.
Ø Check whether the receiver is located too near metal objects or if
there are obstructions between the transmitter and the receiver.
Sound interference Ø Check the antenna location.
Ø When using 2 or more microphone sets simultaneously, make
sure that the chosen frequencies are not interfering with each
other
Ø Check whether the interference comes from other wireless
microphones, TV’s, radios, etc.
Distortion Ø Check the gain control on the bodypack transmitter to make sure
it is not set too high or too low.
Ø Check whether the interference comes from other wireless
microphones, TV’s, radios, etc.