DHTRQUAD UHF USER'S MANUAL ® WIRELESS MICROPHONE SYSTEM ANY SPOT ® ® DHTRQUAD UHF Four Channel Diversity Wireless Receiver IR POWER SYNC MAKERS OF THE ORIGINAL HOT SPOT PERSONAL MONITOR
Contents System Components..........................................1 Rack-Mounting the Receiver...............................2 HH64/HH64SC Handheld Transmitter.................3 MBP64 Bodypack Transmitter.............................4 MBP76 Bodypack Transmitter.............................5 SM-W76 Wireless Shockmount Base..................6 System Setup.....................................................7 Setting up multiple receivers...............................8 Functions of the DHTRQUAD Receiver....
System Components All systems include: ANY SPOT ® ® DHTRQUAD UHF Four Channel Diversity Wireless Receiver IR POWER DHTRQUAD Receiver ¼" to ¼" Audio Cable Power Supply Two Antennas Extension Kit Rack Ears User Guide SYNC O N CHANNEL BATT O F INFRARED Transmitter Options: HH64 / HH64SC Handheld Mic/Transmitter SM-W76 Wireless Shockmount Base Visit our website www.galaxyaudio.
Rack-Mounting the Receiver Rack-Mounting the Receiver Maintain a line of sight between transmitter and antenna. Panel mount BNC feed-through connectors CN-BNCPM Antenna Extension Cable EXTBNC Rack Ears MREDHTQUAD ANY SPOT ® ® DHTRQUAD UHF Four Channel Diversity Wireless Receiver IR SYNC POWER ANT-DISTDC ANY SPOT ® Shown with optional ANT-DISTDC antenna distributor.
HH64/HH64SC Handheld Transmitter Functions: 2 1 GROUP CHANNEL BATT INFRARED 1 Condensor mic 2 Dynamic mic 3 LCD screen Please See “system setup ” on page 8. 4 Power Switch 5 Microphone Input Sensitivity Control. Left turn for output level decrease, right turn for output level increase. 6 IR Port receives infrared beam to synchronize frequencies. 3 4 5 6 Changing Batteries: GROUP CHANNEL BATT INFRARED Batteries should be replaced when LCD indicator flashes.
MBP64 Bodypack Transmitter BodyPack Transmitter 1 1 Antenna. 2 Gain Switch. There are three Gain settings on the MBP64. Select the setting most suitable to your application. Mic: Microphone Level 0: Guitar Level -10dB: Line Level 3 Low Voltage/IR Transmission LED. LED On: Battery Voltage OK. LED Off: the Battery Voltage is Low. Flashing LED: IR transmission is in progress 4 3-pin Input Jack. 5 Power/Backlight Control button Press and Hold for Power On/Off. Press and Release for Back-light On/Off.
MBP76 Bodypack Transmitter Features 1 1 Antenna. 2 LCD panel. Please see (System Setup) on Page 7. 3 Power/ASC/ Low Battery Indicator. Constant Green: Power ON. Flashing Green: IR ASC in progress, or Low Batteries. 4 Mute Indicator. Constant Red: Audio Muted. 5 Power/Mute Button. Push and Hold for Power On/Off. Push once for Mute On/Off. 6 IR Window. Receives IR signals (ASC) to synchronize with Receiver. 7 Select Button. Please see (System Setup) on Page 8. 8 3-pin Microphone Input Jack.
SM-W76 Wireless Shockmount Base 1. Adjust the 16 position rotary knob on the rear of the SM-W76 base to change the frequency. A small flat headed screwdriver can be used. 2. Use the chart to set up the DHTR/TRCR Group & Channel to the frequency that corresponds to the SM-76 base. 3. Once the Group & Channel of the receiver is set, press the gray button on the top of the SM-76 base to turn the microphone on.
System Setup Receiver Programming GROUP CHANNEL ANTENNA MHz A B DISPLAY EXIT VOLUME AUTO GROUP MANUAL CONTROL CHANNEL SELECT CHANNEL FREQUENCY MASTER SELECT SELECT SELECT LIST 2 1 GROUP CHANNEL ANTENNA MHz A B DISPLAY EXIT VOLUME AUTO GROUP MANUAL CONTROL CHANNEL SELECT CHANNEL FREQUENCY MASTER SELECT SELECT SELECT LIST For best results when operating multiple systems, set all systems to a single group, then set each system to a unique channel within that group.
Setting up multiple receivers 4 2 ANY SPOT ® ® DHTRQUAD UHF Four Channel Diversity Wireless Receiver IR POWER SYNC 5 11 1)Power on any pre-existing wireless systems and transmitters except the first DHT system. 2)Power on the first DHT Receiver. 3)The Control and set buttons are on the front of the receiver. 4)Press the set button until the group number flashes on the LCD screen 5)Press the up/down buttons to select group 1. 6Press the set button twice to get to the scan mode.
Functions of the DHTRQUAD Receiver DHTRQUAD Receiver Features Front Panel ANY SPOT ® ® DHTRQUAD UHF Four Channel Diversity Wireless Receiver IR POWER 1 SYNC On/Off Switch 8 System Menu Down button Please see “ System Setup” on Page 8 2 Infrared (IR) Window 9 Antenna A Indicator 3 Audio Level Meter 4 Lights when Antenna A is active . LCD Panel 10 Antenna B Indicator Lights when Antenna B is active .
Troubleshooting Tips for Improving System Performance Maintain a line of sight between transmitters and antennas. Avoid placing the receiver near metal surfaces or any digital equipment (CD players, computers, etc). Keep the receiver away from the wall and at least 1m from the ground. Cellular telephones and two-way radios can interfere with the operation of wireless systems. Do not use these devices in close proximity to the wireless systems. Troubleshooting Issue No sound or faint sound.
Specifications System Shockmount Transmitter: Frequency Range: CODE D 584~607 MHz CODE L 655~679 MHz Transmitter Output level: 10 dBm Band: UHF Operating Range Under Typical Conditions: 300' Note: actual range depends on RF signal absorption, reflection, interference, and battery characteristics.
Accessories and Replacement Parts Many of these parts and accessories may be found and purchased from the Galaxy Audio website in either the Galaxy Store (www.galaxyaudio.com/store.php) or in the accessories tab of each products web page. AS-EXTBNC - BNC Connector and Cable for front mounting the antennas on the DHTQUAD. AS-ANTBNC - Replacement BNC Antenna for use with Galaxy Audio Wireless Personal Monitors and Wireless Microphones. WMC-CGR - DC Charger for AS-1500R, HH64, HH64SC, & MBP76.
DHTRQUAD FREQUENCY CHART FCC Consumer Alert for Wireless Microphones (U.S.) Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device.
THREE YEAR LIMITED WARRANTY WARRANTY Information can be viewed online at http://www.galaxyaudio.com/warranty.php DHTRQUAD USER'S MANUAL Specifications in this manual are subject to change without notice. For the most up to date manual and information visit www.galaxyaudio.com. 1-800-369-7768 www.galaxyaudio.