Owner's manual

Interface Utilities Sub-menu - this sub-menu allows you to define the remote control interface
[USB or RS485] to be used for controlling the DS-EQ230 :
From “Interface Utilities”, press “ENTER” to access the Interface Setup.
Interface Setup: this screen allows you to choose the remote control protocol for the
DS-EQ230.
By pressing “ENTER” and then using the PM2 or PM3 encoders, you can choose between the two
possible interfaces (USB or RS485) for the DS-EQ230.
Pressing ENTER on a selected source will make an asterisk appear to the right of the description
on the LCD as in the following example which shows the selected interface as USB.
DPA-240A
1x2 WAY X-OVER
DPA-240A
1x2 WAY X-OVER
DPA-240A
1x2 WAY X-OVER
DPA-240A
1x2 WAY X-OVER
Interface Setup
Source: USB
*
UTILITY MENU
- Interface Utilities -
INTERFACE UTILITY
- Interface Setup -
13