System Components All ECMR systems include the following components: CHANNEL IR VOLUME RF SELECT ASC AF PEAK MIN MAX ECMR ECMR Receiver One ΒΌ" Audio Cable Power Adapter User Manual Handheld Microphone Systems include the following: HH52 Handheld Transmitter Lavalier/Headset Microphone systems include the following: MBP52 Bodypack Transmitter Microphone (choice of Lavalier, or Headset) AS-HS AS-LV MBP52 1
Functions of the ECMR Receiver Front Panel CHANNEL IR VOLUME AF PEAK RF SELECT 1 2 ASC 3 4 1 Channel Display. Displays selected Channel. 2 Channel select button 3 IR Window. Unit sends Infrared Signal to the Transmitter through this Window for Frequency Synchronization. 4 ASC Synchronizing Signal Transmit Button. Press this Button to establish Infrared connection between the Receiver and Transmitter. MAX MIN 5 6 7 5 RF Signal LED 6 Audio LED. Indicates a peak Audio Signal.
HH52/HH52SC Handheld Transmitter Functions: 1 Microphone Head. 2 Gain (Sensitivity) Control. Turn Left to Decrease Sensitivity. Turn Right to Increase Sensitivity. 3 RF Power Level Switch. H for High Level RF Power. L for Low Level RF Power. 4 IR Window. Receives Infrared signal to synchronize frequencies between Receiver and Transmitter. 5 Battery Tray. 6 Power/ASC/Low Battery Indicator. Green: Power On. Flashing Green: IR Transmission in progress. Red: Batteries Low. 7 Power On/Off Switch.
MBP52 Bodypack Transmitter Functions: 1 2 1 Antenna. 2 Input Gain Switch. There are three Gain settings. Select the setting most suitable to your application. Mic.: Microphone Level. 0: Guitar Level. -10dB: Line Level. 3 Power/Low Battery/IR Transmission LED. Green: Power On, Batteries OK. Flashing Red: Low Batteries. Flashing Green: IR transmission in Progress. 4 3-pin Input Jack. 5 Power Button. Press and Hold to switch Power On/Off. 6 ASC Automatic Frequency Synchronisation.
System Setup ECMR Receiver Setup: Channel Selection Press channel Selector button to select desired Channel. When switching Channels, wait for the Channel number display to stop blinking before using the ASC function. For best results when operating multiple systems, set every channel to achieve the maximum distance between channels. Receiver Volume Control: Turn Left for Output Level decrease, turn Right for Output Level increase.
Specifications ECM System Handheld Transmitter: HH52 Available Channels: 16 Frequency Range: CODE D 584 - 607 MHz CODE L 655 - 679 MHz Transmitter Output level: 10 dBm Band: UHF Max Audio input level: 0dBV Operating Range Under Typical Conditions: 150' (50m) Note: actual range depends on RF signal absorption, reflection, and interference. Weight: 9.5oz (270 g) (without batteries) Gain (Sensitivity): Control High/Low RF power switch. Dimensions: 9.8" x 2.1" dia. (250mm x 53mm dia.