User Manual

8
PA6S/PA6SR & NSPA
FEATURES OF THE GALAXY AUDIO PA6S/PA6SR
· Ultra light weight/high power design
· Special design woofer and tweeter for full range sound
· Two channels with XLR/1/4" inputs and XLR thru outputs
· Additional 1/8" Stereo Line input on Channel 2
• PA6SR includes Wireless Receiver option. (see PA6SR Manual
and visit www.Galaxyaudio.com for instructions).
Using the PA6S (please see illustrations on page 9)
A Balanced Mic signal may be plugged into the Channel 1 XLR
Input. This signal will appear unaltered at the Channel 1 Thru
Output Jack and may be sent on to the Main PA. For strong
signals the -20dB Pad Switch may be engaged to prevent distortion.
A Balanced or Unbalanced Line Level signal may be plugged into
the Channel 1 1/4" Line Input. Channel 1 Input signals are controlled
by the front panel Channel 1 Level Control.
The Channel 2 Inputs, Pad Switch, Thru Output, and Level Control
function identically to those of Channel 1. Channel 2 also features a
1/8" Stereo Line Input, which will accept signals from Tape, CD, Digital
Players, or Instruments. Stereo signals are mixed to Mono and
controlled by the front panel Channel 2 Level control.
The front panel also features a 3-band EQ consisting of Low, Mid,
and High controls, as well as Power, Compressor, and Clip indicators.
Reduce Input levels if the Clip LED comes on.
The rear panel Pre Out provides a line level signal of the entire mix,
after the Level controls, that may be patched to other powered
monitors, mixers, or recording devices. This signal is not affected
by the EQ controls.
The PA6S may be placed on a mic stand using the socket on the
bottom of the cabinet. Some mic stands will require our SA-1
adapter (see page 12). An optional Yoke Wall Bracket is also
available (see page 13). A mic boom or gooseneck may be mounted
to the top of the cabinet using the optional hardware shown on
(page 13).