Information

Al
e
x
SURFACE | AUFBAU
101
max. 12 mm
ultra-at | ultraach | LED Stripes max. 12 mm
200 cm Item No. | Art. Nr. 8102062
PO15
Das PO15 LED AUFBAU-Prol hat ein besonders schmales
und ultraaches Design, ist für LED Flexbänder mit einer
maximalen Breite von 12 mm konzipiert und wird universell
im Innenbereich eingesetzt. Dieses Alu-Prol kann auch
anwendungsspezisch zum Einbau verwendet werden.
Die LED Prolabdeckungen Opal/satiniert (Lichtdurchläs-
sigkeit 65 %) bestehen aus bruchsicherem und schwer
brennbarem Polycarbonat (Klassizierung Brennbarkeit
UL94 V-2) und schaen homogene LED Lichtverhältnisse
mit hoher Verwertung der Lichtleistung.
Abdeckungen auch in 6 m verfügbar!
Dieses LED AUFBAU-Prol kann mit drei unterschied-
lichen Kunststoabdeckungen bestückt werden – ache,
hohe oder runde Abdeckung. Alle drei Abdeckungen um-
schließen das AUFBAU-Prol an der oenen Seite. Somit
ist nur noch die LED Lichtleiste sichtbar. Bei der hohen
und runden Abdeckungen leuchtet das Licht der LED
Stripes in drei Richtungen (auch seitlich). Die Innenhöhe
(Abstand zwischen LED Chips und Abdeckung) ist für eine
durchgängige Lichtlinie abgestimmt - keine Lichtpunkte!
Das PO15 LED AUFBAU-Prol ist ultraach und fügt sich
somit sehr gut in die Umgebungsbedingungen ein. Wegen
der kleinen Abmessungen und des geringen Gewichtes ist
es unter anderem als ideale LED Lichtquelle in Wohn- und
Büromöbeln, Wohnaccessoires, Vitrinen, Regalen sowie an
Treppenstufen, Wänden und Decken geeignet.
PO15 LED SURFACE Prole has a particularly narrow and
extremely at design, is designed for LED exstripes with
a maximum width of 12 mm and is universally used in
the Interior areas. This aluminium prole can be used to
install application-specic.
The LED prole covers opal/satinised (translucence 65%)
are made of shatter-proof, non-ammable polycarbonate
(classication ammability UL94 V-2) and create homoge-
neous LED lighting conditions with high utilisation of the
light output.
Covers also available in 6m length!
This LED SURFACE Prole can be tted with three dierent
plastic covers - at, high or round cover. All three covers
enclosed the CONSTRUCTION prole on the open side.
Thus only the LED light bar is visible. With the high and
round covers, the light from the LED stripes is illuminated
in three directions (also to the side). The interior height
(distance between LED chips and cover) is coordinated
for a continuous light line - no pinpoints of light!
The PO15 LED SURFACE Prole is extremely at and thus
ts very well into the environment. This is ideally suited
as an LED light source in residential and oce furniture,
home accessories, display cases, shelves and stairs and
on walls and ceilings, among other things, due to their
small dimensions and low weight.
PO15+ C5
PO15 + C3 PO15 + C4
Perfect Light Lines
PO15
max.
12 mm
OEM