Information
Al
e
x
SURFACE | AUFBAU
145
The PN8 LED SURFACE Prole is 200cm long as standard,
comes in black and white, is made from high-quality alu-
minium (anodised) and is designed for use as an RECES-
SED or SURFACE-MOUNTED prole as well as an inde-
pendent linear lighting system (in combination with the
PL10 cable port or the PL10.1 mounting prole - with or
without cable suspension).
The standard at prole cover made from shatterproof,
ame-retardant polycarbonate (classication ammability
UL94 V-2 - opal/satinised - 65% transparency) will com-
pletely cover the top of the aluminium prole, and LED
ex stripes with a maximum width of 16mm can be xed
with adhesive.
Covers also available in 6m length!
When using the innovative H2O cover (also opal/satinsed
polycarbonate), with the PN33 aluminium cooling strip as
a carrier for the LED ex stripe, the maximum width for
LED stripes is 13mm. The H2O end caps are made from
silicone and are inserted into the side of the prole like a
plug. This prevents moisture and water from getting in.
The H2O end caps with cable channels must be sealed
with silicone!
Das PN8 LED AUFBAU-Prol wird standardmäßig mit
200 cm Länge und je nach Wunsch auch in den Farben
Schwarz und Weiß geliefert, ist aus hochwertigem Alumi-
nium (eloxiert) gefertigt und für den Einsatz sowohl als
AUFBAU- und EINBAU-Prol als auch als eigenständiges
lineares Leuchtensystem (in Verbindung mit der Kabel-
schleuse PL10 oder dem Montageprol PL10.1 – mit und
ohne Seilabhängung) konzipiert.
Mit der achen Standard-Prolabdeckung aus bruch-
sicherem und schwer brennbaren Polycarbonat (Klassi-
zierung Brennbarkeit UL94 V-2 - opal/satiniert – Licht-
durchlässigkeit 65 %) wird das ALU-Prol oberseitig
komplett abgedeckt und es können LED Flexbänder mit
einer max. Breite von 16 mm eingeklebt werden.
Abdeckungen auch in 6 m verfügbar!
Beim Einsatz der innovativen H2O-Abdeckung (ebenfalls
aus Polycarbonat und opal/satiniert), in die der ALU-
Kühlstreifen PN33 als Trägerobjekt für das LED Flexband
eingesetzt wird, beträgt die max. Breite für LED Stripes
13 mm. Die H2O-Endkappen bestehen aus Silikon und
werden seitlich wie ein Pfropf in das Prol gesteckt. Dies
verhindert das Eindringen von Feuchtigkeit und Wasser.
Die H2O-Endkappen mit Kabeldurchführung müssen mit
Silikon abgedichtet werden!
LED Stripes max. 16 mm
200 cm Item No. | Art. Nr. 8101020
PN8
max. 16 mm
max.
16 mm
OEM
PN8 + PL10 + C10 + ZO3
PN8 + PL10 + C20PN8 + C20
PN8 + C21 + PN33
NEW
Perfect Light Lines
PN8
NEW