Information
Al
e
x
SURFACE | AUFBAU
121
max. 24 mm
at | ach | LED Stripes max. 24 mm
200 cm Item No. | Art. Nr. 8201012
PN4
Das PN4 LED AUFBAU-Prol hat ein schmales Design,
ist für LED Flexbänder mit einer maximalen Breite von
24 mm konzipiert und wird universell im Innenbereich
(in Verbindung mit PL10 LED AUFBAU-Prol und Kabel-
Universalkanal auch als eigenständige LED Hängeleuchte
mit Seilabhängung oder als LED Leuchte xiert mit
Montagefedern) eingesetzt. Dieses Alu-Prol kann auch
anwendungsspezisch zum Einbau verwendet werden.
Die LED Prolabdeckungen opal/satiniert (Lichtdurchläs-
sigkeit 65 %), frosted (Lichtdurchlässigkeit 75 %) oder klar
(Lichtdurchlässigkeit 85 %) bestehen aus bruchsicherem
und schwer brennbarem Polycarbonat (Klassizierung
Brennbarkeit UL94 V-2) und schaen homogene LED
Lichtverhältnisse mit hoher Verwertung der Lichtleistung.
(Keine Lichtpunkte, sondern durchgängige Lichtlinie)
Abdeckungen auch in 6 m verfügbar!
Dieses LED AUFBAU-Prol kann mit vier unterschiedlichen
Kunststoabdeckungen bestückt werden – ache, hohe,
sehr hohe oder runde Abdeckung. Bei der achen Ab-
deckung strahlt das Licht in eine Richtung, hingegen bei
der hohen, sehr hohen und runden Abdeckung leuchtet
das Licht der LED Stripes in drei Richtungen (auch seitlich).
Das PN4 LED AUFBAU-Prol hat einen großen Kühlkörper
und kann somit mit starken LED Flexbändern bestückt
werden. Die Innenhöhe (Abstand zwischen LED Chips
und Abdeckung) ist für eine durchgängige Lichtlinie abge-
stimmt - keine Lichtpunkte! Es kann sowohl als allgemeine
Raum- und Objektbeleuchtung als auch als Dekor- und
Eektbeleuchtung eingesetzt werden.
The PN4 LED SURFACE Prole has a narrow design and
is designed for LED exstripes with a maximum width of
24 mm and is universally used in interior areas (in con-
junction with the PL10 LED SURFACE Prole and cable
universal duct also as a stand-alone LED pendant lamp
with cord suspension or as LED lamp xed with mounting
springs). This aluminium prole can be used to install ap-
plication-specic.
These LED opal/satinised (65% translucency), frosted (75
% translucency) or clear (85% translucency) prole covers
are made from shatterproof, ame-retardant polycarbo-
nate (ame retardancy classication UL94 V-2) and crea-
te uniform LED light with a high transference of the light
output. (No points of light, just continuous lines of light)
Covers also available in 6m length!
This LED SURFACE Prole can be tted with four dierent
plastic covers - at, high, very high, or round cover. With
the at cover, the light shines in one direction, however,
with the high, very high and round cover, the light illumi-
nates the LED stripes in three directions (also on the side).
The PN4 LED SURFACE Prole has a large heat sink and
can therefore be equipped with strong LED exstripes.
The interior height (distance between LED chips and
cover) is coordinated for a continuous light line - no pin-
points of light! It can be used both as a general spatial and
object lighting as well as décor and eect lighting.
PN4 + PL10 + C13 + ZO3
PN4 + PL10 + C11PN4 + C12
PN4 + C10
Perfect Light Lines
PN4
max.
24 mm
OEM