Information
Al
e
x
127
Das PN5 LED EINBAU-Prol hat ein schmales Design,
ist für LED Flexbänder mit einer maximalen Breite von
24 mm konzipiert und wird universell im Innenbereich ein-
gesetzt (optional mit dem zusätzlichen Kabel-Universal-
kanal PL10).
Die LED Prolabdeckungen opal/satiniert (Lichtdurchläs-
sigkeit 65 %), frosted (Lichtdurchlässigkeit 75 %) oder klar
(Lichtdurchlässigkeit 85 %) bestehen aus bruchsicherem
und schwer brennbarem Polycarbonat (Klassizierung
Brennbarkeit UL94 V-2) und schaen homogene LED
Lichtverhältnisse mit hoher Verwertung der Lichtleistung.
(Keine Lichtpunkte, sondern durchgängige Lichtlinie)
Abdeckungen auch in 6 m verfügbar!
Dieses LED EINBAU-Prol kann mit vier unterschiedli-
chen Kunststoabdeckungen bestückt werden – ache,
hohe, sehr hohe oder runde Abdeckung. Bei der achen
Abdeckung strahlt das Licht in eine Richtung, hingegen
bei der hohen, sehr hohen und runden Abdeckung
leuchtet das Licht der LED Stripes in drei Richtungen
(auch seitlich). Die Innenhöhe (Abstand zwischen LED
Chips und Abdeckung) ist bei der hohen, sehr hohen
und runden Abdeckung für eine durchgängige Lichtlinie
abgestimmt - keine Lichtpunkte! Das PN5 LED EINBAU-
Prol hat einen großen Kühlkörper und kann somit mit
starken LED Flexbändern bestückt werden. Es kann
sowohl als allgemeine Raum- und Objektbeleuchtung
als auch als Dekor- und Eektbeleuchtung eingesetzt
werden. Es ist ideal zum Einbau in Decken und Wänden.
PN5 LED RECESSED Prole has a narrow design, is desi-
gned for LED exstripes with a maximum width of 24 mm
and is universally used in the Interior (optional with the
additional cable universal duct PL10).
These LED opal/satinised (65% translucency), frosted (75
% translucency) or clear (85% translucency) prole covers
are made from shatterproof, ame-retardant polycarbo-
nate (ame retardancy classication UL94 V-2) and crea-
te uniform LED light with a high transference of the light
output. (No points of light, just continuous lines of light)
Covers also available in 6m length!
This LED RECESSED Prole can be tted with four die-
rent plastic covers - at, high, very high, or round cover.
With the at cover, the light shines in one direction, ho-
wever, with the high, very high and round cover, the light
illuminates the LED stripes in three directions (also on the
side). The interior height (distance between LED chips and
cover) is coordinated with the high, very high and round
cover for a continuous line of light - no pinpoints of light!
The PN5 LED RECESSED Prole has a large heat sink and
can therefore be equipped with strong LED exstripes. It
can be used both as a general spatial and object lighting
as well as décor and eect lighting. It is ideal for installati-
on in walls and ceilings.
RECESSED | EINBAU
at/wings | ach/Flügel | LED Stripes max. 24 mm
200 cm Item No. | Art. Nr. 8206012
max. 24 mm
PN5
PN5 + PL10 + C11
PN5 + C10 PN5 + C12 PN5 + C13
Perfect Light Lines
PN5
max.
24 mm
OEM