Information

Al
e
x
165
CORNER | ECK
max. 35 mm
asymmetrical | asymmetrisch | LED Stripes max. 35 mm
200 cm Item No. | Art. Nr. 8105043
PN18
Das PN18 LED ECK-Prol ist für LED Flexbänder mit einer
maximalen Breite von 35 mm konzipiert und wird
universell im Innenbereich (auch als eigenständige LED
Hängeleuchte mit Seilabhängung – mit und ohne PL10
Kabelkanal möglich - oder als LED Leuchte mit Kabelkanal)
eingesetzt.
Die eckförmige LED Prolabdeckung Opal/satiniert
(Lichtdurchlässigkeit 65 %) besteht aus bruchsicherem
und schwer brennbarem Polycarbonat (Klassizierung
Brennbarkeit UL94 V-2) und schat homogene LED Licht-
verhältnisse mit hoher Verwertung der Lichtleistung. Die
Innenhöhe (Abstand zwischen LED Chips und Abdeckung)
ist für eine durchgängige Lichtlinie abgestimmt - keine Licht-
punkte!
Das PN18 LED ECK-Prol ist die ideale Lichtquelle für eine
allgemeine LED Raum- und Objektbeleuchtung an Wänden
und Decken. Der besondere Mehrwert ist das durchdach-
te Design. Dieses Prol ist sehr exibel einsetzbar, denn es
weist eine Zwischenebene auf, die bei Bedarf durch einfa-
ches Herausziehen entnommen werden kann. Das Prol
ist asymmetrisch geformt. Mit der dazugehörigen eckför-
migen Abdeckung erzielt man eine homogene Raum-/Ob-
jektbeleuchtung in zwei Richtungen. Dieses Prolsystem ist
ideal für die Montage in Ecken.
Dieses LED ECK-Prol kann zudem ohne weiterer Adaption
(oder in Verbindung mit dem PL10 Kabelkanal) mit
einer Seilabhängung versehen und als eigenständige LED
Hängeleuchte eingesetzt werden.
PN18 LED CORNER prole is designed for LED exstripes
with a maximum width of 35 mm and is universally used in
the Interior areas (also as a stand-alone LED pendant lamp
with cord suspension - possible with and without PL10 ca-
ble duct or as LED lamp xed with cable duct).
The angular-shaped LED prole cover opal/satinised
(translucence 65%) is made of shatter-proof, non-am-
mable polycarbonate (classication ammability UL94 V-2)
and creates homogeneous LED lighting conditions with
high utilisation of the light output. The interior height (di-
stance between LED chips and cover) is coordinated for a
continuous light line - no pinpoints of light!
The PN18 LED CORNER prole is the ideal light source for
a general LED spatial and object illumination on walls and
ceilings. The well-thought-out design is of special value.
This prole can be used very exibly, because it has an in-
termediate level, which can be removed by simply pulling it
out if necessary. The prole is shaped asymmetrically. The
corresponding angularly-shaped cover gives a homoge-
neous spatial/object lighting in two directions. This prole
system is ideal for mounting in corners.
This LED CORNER prole can be also equipped with a
cord suspension without further adaptation and used as
stand-alone LED pendant lamp (or in conjunction with the
PL10 cable duct).
PN18 + C15 + ZO3
PN18 + C15 + PL10 + ZO3
PN18 + C15 PN18 + C15
Perfect Light Lines
PN18
max.
35 mm
OEM