Information
Al
e
x
max. 12 mm
SURFACE | AUFBAU
37
high | hoch | LED Stripes max. 12 mm
200 cm Item No. | Art. Nr. 8105201
PL5
Das PL5 LED AUFBAU-Prol hat ein besonders schmales
Design, ist für LED Flexbänder mit einer maximalen
Breite von 12 mm konzipiert und wird universell im
Innenbereich (in Verbindung mit dem PL10 Aufbaupro-
l und Kabel-Universalkanal auch als eigenständige LED
Hängeleuchte mit Seilabhängung oder als LED Leuchte
xiert mit Montageklammern/-federn) eingesetzt. Dieses
Alu-Prol kann auch anwendungsspezisch zum Einbau
verwendet werden.
Die LED Prolabdeckungen Opal/satiniert (Lichtdurchläs-
sigkeit 65 %) bestehen aus bruchsicherem und schwer
brennbarem Polycarbonat (Klassizierung Brennbarkeit
UL94 V-2) und schaen homogene LED Lichtverhältnisse
mit hoher Verwertung der Lichtleistung (keine Lichtpunk-
te, sondern durchgängige Lichtlinie).
Abdeckungen auch in 6 m verfügbar!
Dieses LED AUFBAU-Prol kann mit drei unterschied-
lichen Kunststoabdeckungen bestückt werden – ache,
hohe oder runde Abdeckung. Alle drei Abdeckungen um-
schließen das AUFBAU-Prol an der oenen Seite. Somit
ist nur noch die LED Lichtleiste sichtbar. Bei der achen
Abdeckung strahlt das Licht in eine Richtung, hingegen
bei der hohen und runden Abdeckung leuchtet das Licht
der LED Stripes in drei Richtungen (auch seitlich).
Das PL5 LED AUFBAU-Prol hat einen großen Kühl-
körper und kann somit mit stärkeren LED Flexbändern
bestückt werden. Wegen der kleinen Abmessungen und
des geringen Gewichtes ist es unter anderem als ideale
LED Lichtquelle in Wohn- und Büromöbeln, Wohn-
accessoires, Vitrinen sowie an Treppenstufen, Regalen,
Wänden und Decken geeignet.
The PL5 LED SURFACE Prole has a particularly narrow
design and is designed for LED exstripes with a maxi-
mum width of 12 mm and is universally used in interior
areas (in conjunction with the PL10 construction prole
and cable universal duct also as a stand-alone LED pen-
dant lamp with cord suspension or as LED lamp xed with
mounting brackets/springs). This aluminium prole can
be used to install application-specic.
The LED prole covers opal/satinised (translucence 65%)
are made of shatter-proof, non-ammable polycarbonate
(classication ammability UL94 V-2) and create homoge-
neous LED lighting conditions with high utilisation of the
light output (no pinpoints of light, but rather a continuous
line of light).
Covers also available in 6m length!
This LED SURFACE Prole can be tted with four dierent
plastic covers - at, high or round cover. All three covers
enclosed the CONSTRUCTION prole on the open side.
Thus only the LED light bar is visible. With the at cover,
the light shines in one direction, however, with the high
and round cover, the light illuminates the LED stripes in
three directions (also on the side).
The PL5 LED SURFACE Prole has a large heat sink and
can therefore be equipped with stronger LED exstri-
pes. It is ideally suited as an LED light source in residen-
tial and oce furniture, home accessories, display cases,
shelves and stairs and of course on walls and ceilings,
among other things, due to their small dimensions and
low weight.
PL5 + PL10 + C5 + ZO3
PL5 + PL10 + C4PL5 + C3
PL5 + C3
Perfect Light Lines
PL5
OEM
max.
12 mm