Information
Al
e
x
max. 12 mm
SURFACE | AUFBAU
43
at | ach | LED Stripes max. 12 mm
200 cm Item No. | Art. Nr. 8106062
PL6
Das PL6 LED AUFBAU-Prol hat ein besonders schmales
und aches Design, ist für LED Flexbänder mit einer
maximalen Breite von 12 mm konzipiert und wird
universell im Innenbereich (in Verbindung mit dem PL10
Aufbauprol und Kabel-Universalkanal auch als eigen-
ständige LED Hängeleuchte mit Seilabhängung oder
als LED Leuchte xiert mit Montageklammern/-federn)
eingesetzt. Dieses Alu-Prol kann auch anwendungs-
spezisch zum Einbau verwendet werden.
Die LED Prolabdeckungen Opal/satiniert (Lichtdurchläs-
sigkeit 65 %) bestehen aus bruchsicherem und schwer
brennbarem Polycarbonat (Klassizierung Brennbarkeit
UL94 V-2) und schaen homogene LED Lichtverhältnisse
mit hoher Verwertung der Lichtleistung. Dieses LED
AUFBAU-Prol kann mit drei unterschiedlichen Kunst-
stoabdeckungen bestückt werden – ache, hohe oder
runde Abdeckung. Alle drei Abdeckungen umschließen
das AUFBAU-Prol an der oenen Seite. Somit ist nur
noch die LED Lichtleiste sichtbar. Bei allen Abdeckungen
leuchtet das Licht der LED Stripes in drei Richtungen
(auch seitlich). Die Innenhöhe (Abstand zwischen LED
Chips und Abdeckung) ist bei der hohen und runden
Abdeckung für eine durchgängige Lichtlinie abgestimmt
- keine Lichtpunkte!
Abdeckungen auch in 6 m verfügbar!
Das PL6 LED AUFBAU-Prol ist ultraach und fügt sich so-
mit sehr gut in die Umgebungsbedingungen ein. Wegen
der kleinen Abmessungen und des geringen Gewichtes
ist es unter anderem als ideale LED Lichtquelle in Wohn-
und Büromöbeln, Wohnaccessoires, Vitrinen, Regalen
sowie an Treppenstufen, Wänden und Decken geeignet.
The PL6 LED SURFACE Prole has a particularly narrow
and at design and is designed for LED exstripes with
a maximum width of 12 mm and is universally used in
interior areas (in conjunction with the PL10 construction
prole and cable universal duct also as a stand-alone LED
pendant lamp with cord suspension or as LED lamp xed
with mounting brackets/springs). This aluminium prole
can be used to install application-specic.
The LED prole covers opal/satinised (translucence 65%)
are made of shatter-proof, non-ammable polycarbonate
(classication ammability UL94 V-2) and create homoge-
neous LED lighting conditions with high utilisation of the
light output.
This LED SURFACE Prole can be tted with four dierent
plastic covers - at, high or round cover. All three covers
enclosed the CONSTRUCTION prole on the open side.
Thus only the LED light bar is visible. For all covers, the
LED stripes light in three directions (also on the side). The
interior height (distance between LED chips and cover) is
matched with the high and round cover for a continuous
line of light - no pinpoints of light!
Covers also available in 6m length!
The PL6 LED SURFACE Prole is extremely at and thus
ts very well into the environment. This is ideally suited
as an LED light source in residential and oce furniture,
home accessories, display cases, shelves and stairs and
on walls and ceilings, among other things, due to their
small dimensions and low weight.
PL6 + PL10 + C5 + ZO3
PL6 + PL10 + C4PL6 + C3
PL6 + C3
Perfect Light Lines
PL6
OEM
max.
12 mm