Information

77
Al
e
x
max. 12 mm
CLOTHES RACK
KLEIDERSTANGE
LED Stripes max. 12 mm
200 cm Item No. | Art. Nr. 8401001
PO1
Das PO1 LED KLEIDERSTANGEN-Prol wird aus
qualitativ hochwertigem Aluminium (eloxiert) gefertigt
und als beleuchtete Aufhängevorrichtung für Kleider-
bügel konzipiert. Dieses Prol hat dieselbe Tragkraft wie
herkömmliche Qualitäts-Kleiderstangen.
Einseitig können LED Flexbänder mit einer maximalen
Breite von 16 mm eingeklebt werden. Aufgrund der Ab-
messungen ist dieses Prol auch für leistungsstärkere LED
Stripes geeignet. Die an den LED Chips entstehende
Wärme wird über die große Oberäche des Prols perfekt
abgeführt.
Die LED Prolabdeckung (opal/satiniert - Lichtdurchlässig-
keit 65 %) besteht aus bruchsicherem und schwer brenn-
barem Polycarbonat (Klassizierung Brennbarkeit UL94
V-2) und sorgt für homogene Lichtverhältnisse mit hoher
Verwertung der Lichtleistung.
Der Lichtstrahl des im PO1 LED KLEIDERSTANGEN-Prols
eingeklebten LED Flexbandes kann je nach Bedarf exibel
in mehrere Richtungen ausgerichtet werden. Mit den
dazugehörigen Montage-Halterungen jedoch ausschließ-
lich wahlweise nach oben oder unten, je nachdem wie das
Prol eingehängt wird (das Prol liegt frei in den Halter-
ungen – nicht verschraubt).
This PO1 LED CLOTHES RACK Prole has been designed in
high-quality aluminium (anodised) as an illuminated han-
ging solution for clothes hangers. This prole can carry the
same load as high-quality standard clothes racks.
LED ex stripes up to a maximum of 16mm in width can
be xed to one side using adhesive. Thanks to its measu-
rements, this prole is also suitable for higher-power LED
stripes. The heat created by the LED chips dissipates over
the prole’s large surface area.
This prole cover (opal/satinised - 65% transparency) is
made from shatterproof, ame-retardant polycarbonate
(classication ammability UL94 V-2) and ensures a uni-
form light with high transfer of the light output.
The light beam from the LED ex stripe xed to the PO1
LED CLOTHES RACK Prole can be mounted in several di-
rections as needed. If the mounting holders are used, you
can only choose from upwards or downwards, depending
on how the prole is hung (the prole sits on the holders
without screws).
OEM
PO1 + C101
Perfect Light Lines
max.
12 mm
NEW
PO1
NEW