Information

Al
e
x
SURFACE | AUFBAU
161
max. 35 mm
symmetrical | symmetrisch | LED Stripes max. 35 mm
200 cm Item No. | Art. Nr. 8105042
PN17
Das PN17 LED AUFBAU-Prol ist für LED Flexbänder mit
einer maximalen Breite von 35 mm konzipiert und wird
universell im Innenbereich (auch als eigenständige LED
Hängeleuchte mit Seilabhängung eingesetzt). Dieses
Alu-Prol kann auch anwendungsspezisch zum Einbau
verwendet werden.
Die LED Prolabdeckung Opal/satiniert (Lichtdurchläs-
sigkeit 65 %) besteht aus bruchsicherem und schwer
brennbarem Polycarbonat (Klassizierung Brennbarkeit
UL94 V-2) und schat homogene LED Lichtverhältnisse
mit hoher Verwertung der Lichtleistung. Die Innenhöhe
(Abstand zwischen LED Chips und Abdeckung) ist für eine
durchgängige Lichtlinie abgestimmt - keine Lichtpunkte!
Abdeckungen auch in 6 m verfügbar!
Das PN17 LED AUFBAU-Prol ist die ideale Lichtquelle
für eine allgemeine LED Raum- und Objektbeleuchtung
an Wänden und Decken. Der besondere Mehrwert ist
das durchdachte Design. Dieses Prol ist sehr exibel
einsetzbar, denn es weist eine Zwischenebene auf, die
bei Bedarf durch einfaches Herausziehen entnommen
werden kann.
Dieses LED AUFBAU-Prol kann zudem ohne weiterer
Adaption (oder in Verbindung mit dem PL10 Kabelkanal)
mit einer Seilabhängung versehen und als eigenständige
LED Hängeleuchte eingesetzt werden.
PN17 LED SURFACE Prole is designed for LED exstripes
with a maximum width of 35 mm and is universally used
in the Interior areas (also as a stand-alone LED pendant
lamp with cord suspension). This aluminium prole can
be used to install application-specic.
The LED prole cover opal/satinised (translucence 65%)
is made of shatter-proof, non-ammable polycarbonate
(classication ammability UL94 V-2) and creates homo-
geneous LED lighting conditions with high utilisation of
the light output. The interior height (distance between
LED chips and cover) is coordinated for a continuous light
line - no pinpoints of light!
Covers also available in 6m length!
The PN17 LED SURFACE Prole is the ideal light source for
a general LED spatial and object illumination on walls and
ceilings. The well-thought-out design is of special value.
This prole can be used very exibly, because it has an in-
termediate level, which can be removed by simply pulling
it out if necessary.
This LED SURFACE Prole can be also equipped with a
cord suspension without further adaptation and used as
stand-alone LED pendant lamp (or in conjunction with the
PL10 cable duct).
PN17 + C14 + ZO3
PN17 + C14 + PL10 + ZO3
PN17 + C14
PN17 + C14
Perfect Light Lines
PN17
max.
35 mm
OEM