Information
Al
e
x
169
LED Stripes max. 20 mm
200 cm Item No. | Art. Nr. 8105044
CORNER | ECK
max. 20 mm
Das PN19 LED ECK-Prol ist für LED Flexbänder mit
einer maximalen Breite von 20 mm konzipiert und wird
universell im Innenbereich (auch als eigenständige LED
Hängeleuchte mit Seilabhängung – mit und ohne PL10
Kabelkanal möglich - oder als LED Leuchte mit Kabel-
kanal) eingesetzt.
Die eckförmige sowie die abgerundete LED Prolab-
deckung Opal/satiniert (Lichtdurchlässigkeit 65 %)
bestehen aus bruchsicherem und schwer brennbarem
Polycarbonat (Klassizierung Brennbarkeit UL94 V-2)
und schaen homogene LED Lichtverhältnisse mit hoher
Verwertung der Lichtleistung. Die Innenhöhe (Abstand
zwischen LED Chips und Abdeckung) ist für eine durch-
gängige Lichtlinie abgestimmt - keine Lichtpunkte!
Das PN19 LED ECK-Prol ist die ideale Lichtquelle für
eine allgemeine LED Raum- und Objektbeleuchtung an
Wänden und Decken. Der besondere Mehrwert ist das
durchdachte Design. Das Prol ist asymmetrisch geformt.
Mit der dazugehörigen Abdeckung erzielt man eine
homogene Raum-/Objektbeleuchtung in zwei Richtungen.
Dieses Prolsystem ist perfekt für die Montage in Ecken.
Dieses LED ECK-Prol kann zudem ohne weiterer
Adaption (oder in Verbindung mit dem PL10 Kabelkanal)
mit einer Seilabhängung versehen und als eigenständige
LED Hängeleuchte eingesetzt werden.
PN19 LED CORNER prole is designed for LED exstripes
with a maximum width of 20 mm and is universally used
in the Interior areas (also as a stand-alone LED pendant
lamp with cord suspension - possible with and without
PL10 cable duct or as LED lamp xed with cable duct).
The angular-shaped and rounded LED prole cover opal/
satinised (translucence 65%) is made of shatter-proof,
non-ammable polycarbonate (classication ammability
UL94 V-2) and creates homogeneous LED lighting condi-
tions with high utilisation of the light output. The interior
height (distance between LED chips and cover) is coor-
dinated for a continuous light line - no pinpoints of light!
The PN19 LED CORNER prole is the ideal light source for
a general LED spatial and object illumination on walls and
ceilings. The well-thought-out design is of special value.
The prole is shaped asymmetrically. The corresponding
cover gives a homogeneous spatial/object lighting in two
directions. This prole system is ideal for mounting in cor-
ners.
This LED CORNER prole can be also equipped with a
cord suspension without further adaptation and used as
stand-alone LED pendant lamp (or in conjunction with the
PL10 cable duct).
PN19
PN19 + C16 + ZO3
PN19 + C17 + PL10 + ZO3
PN19 + C16 PN19 + C17
Perfect Light Lines
PN19
max.
20 mm
OEM