Information
Al
e
x
177
Designed for tile concepts!
This PF1 LED TILE Prole INTERIOR CORNER is 250cm
long as standard and designed for LED ex stripes up to
12mm in width. The connection cables are protected and
secured in the cavity on the back of the aluminium prole.
This prole system is xed to the large wings at the rear
of the protruding vertical corners of a room, integrating it
into the overall tile concept.
This LED prole cover (opal/satinised - 65% transparency)
is made from shatterproof, ame-retardant polycarbona-
te (classication ammability UL94 V-2), provides a ush
nish and ensures a uniform light with high transfer of
the light output.
Important:
This product can only be used in wet rooms or outside
when sealed. Special protection against moisture and wa-
ter is provided by silicone, which is applied to the joints in
order to seal them. A completely waterproof seal can only
be achieved on these LED prole systems by applying a
casting resin with a polyurethane resin base (PUR).
When choosing a LED ex stripe, check the manufactu-
rer’s protection class (at least IP65).
Designt für Fliesenkonzepte!
Dieses PF1 LED FLIESEN-Prol INNENECK hat eine
Standardlänge von 250 cm und ist für LED Flexbänder mit
einer maximalen Breite von 12 mm konzipiert. Im rück-
seitigen Hohlraum des Alu-Prols werden die Anschluss-
leitungen geschützt und sicher verlegt. Dieses Prol-
system wird an den seitlichen, großächigen Flügeln
in vertikale Ecken eines Raumes mit Fliesenkleber ver-
spachtelt und damit in das Fliesenkonzept integriert.
Die LED Prolabdeckung (opal/satiniert - Lichtdurchläs-
sigkeit 65 %) besteht aus bruchsicherem und schwer
brennbarem Polycarbonat (Klassizierung Brennbarkeit
UL94 V-2), schließt bündig ab und schat homogene LED
Lichtverhältnisse mit hoher Verwertung der Lichtleistung.
Wichtiger Hinweis:
Der Einsatz in Nasszellen oder im Außenbereich ist
ausschließlich nur in abgedichteter Form möglich. Be-
sonderen Schutz vor Feuchtigkeit und Wasser bietet
Silikon, das zum Abdichten auf die Verbindungsstellen
aufgetragen wird. Absolute Wasserdichtheit erreicht
man bei den LED Prolsystemen mit dem Vergießen mit
Wepuran-Gießharz auf Polyurethanharzbasis (PUR).
Achten Sie bei der Wahl des LED Flexbandes auf die
herstellerseitig angegebene Schutzart (mindestens IP65).
TILE | FLIESEN
Interior corner | Inneneck | LED Stripes max. 12 mm
250 cm Item No. | Art. Nr. 8402001
PF1
max. 12 mm
PF1 + C102
Perfect Light Lines
max.
12 mm
OEM
NEW
PF1
NEW