Information
Al
e
x
max. 12 mm
PL2
at | ach | LED Stripes max. 12 mm
200 cm Item No. | Art. Nr. 8106012
SURFACE | AUFBAU
29
Das PL2 LED AUFBAU-Prol hat ein besonders schmales
Design, ist für LED Flexbänder mit einer maximalen Breite
von 12 mm konzipiert und wird universell im Innenbereich
(in Verbindung mit dem PL10 Aufbauprol und Kabel-Uni-
versalkanal auch als eigenständige LED Hängeleuchte mit
Seilabhängung oder als LED Leuchte xiert mit Montage-
klammern/-federn) eingesetzt. Dieses Alu-Prol kann auch
anwendungsspezisch zum Einbau verwendet werden.
Die LED Prolabdeckungen Opal/satiniert (Lichtdurch-
lässigkeit 65 %) oder Klar (Lichtdurchlässigkeit 85 %)
bestehen aus bruchsicherem und schwer brennbarem
Polycarbonat (Klassizierung Brennbarkeit UL94 V-2)
und schaen homogene LED Lichtverhältnisse mit hoher
Verwertung der Lichtleistung.
Abdeckungen auch in 6 m verfügbar!
Dieses LED Prol hat aufgrund seiner im Vergleich zum
PL1 LED AUFBAU-Prol größeren Innenhöhe auch einen
größeren Kühlkörper und kann somit mit stärkeren LED
Flexbändern bestückt werden, ohne dabei auf homogene
LED Lichtlinien verzichten zu müssen (keine Lichtpunkte,
sondern durchgängige Lichtlinie). Wegen der kleinen
Abmessungen und des geringen Gewichtes ist dieses
Prolsystem unter anderem als ideale LED Lichtquelle
in Wohn- und Büromöbeln, Wohnaccessoires, Vitrinen,
Regalen sowie an Treppenstufen und selbstverständlich
an Wänden und Decken geeignet.
The PL2 LED SURFACE Prole has a particularly narrow
design and is designed for LED exstripes with a maxi-
mum width of 12 mm and is universally used in interior
areas (in conjunction with the PL10 construction prole
and cable universal duct also as a stand-alone LED pen-
dant lamp with cord suspension or as LED lamp xed with
mounting brackets/springs). This aluminium prole can
be used to install application-specic.
The LED prole covers opal/satinised (translucence 65%)
or clear (translucence 85%) are made of shatter-proof,
non-ammable polycarbonate (classication ammability
UL94 V-2) and create homogeneous LED lighting condi-
tions with high utilisation of the light output.
Covers also available in 6m length!
This LED prole also has a larger heat sink due to its gre-
ater interior height compared to the PL1 LED SURFACE
Prole and can thus be equipped with more powerful
LED exstripes without having to sacrice homogeneous
LED light lines (no pinpoints of light but rather continuous
lines of light). This LED prole is ideally suited as an LED
light source in residential and oce furniture, home ac-
cessories, display cases, shelves and stairs and of course
on walls and ceilings, among other things, due to their
small dimensions and low weight.
PL2 + PL10 + C1 + ZO3
PL2 + PL10 + C1
PL2 + PL10 + C1PL2 + C2
PL2
max.
12 mm
OEM