User Guide

Mic Boom Part: MSB

HS7 + PA6 Yoke Bracket

Part: SA-YBRF

Note: Follow instructions included with optional

PA6S/HS7 yoke bracket kit.

Optional Boom Mount Hardware

Part: MBA

WALL/CEILING MOUNTING

Galaxy Audio yoke brackets can be used for permanently

mounting HS7, PA6S and MICRO SPOT loudspeakers to walls

and ceilings. The mounting angle can be adjusted by simply

loosening the wing screws at either end of the yoke and by

loosening the bolt where the yoke mounts to the wall plate.

These brackets should be used only on a flat, secure, and

stable surface.

PRECAUTIONS:

Whenever an object is affixed to a wall or ceiling, you must take

special care to mount it securely to prevent it from falling and

causing damage or injury.

MOUNTING SURFACES: Carefully examine the composition,

construction and strength of the surface you are mounting to.

Be sure to provide adequate reinforcement should you deem it

necessary. You must also consider what type of hardware and

what type of mounting techniques are appropriate for each

mounting surface.

FASTENERS: Attaching the bracket requires fasteners selected for

the strength and composition of the mounting surfaces involved.

Whatever fastener is selected, it should be no smaller than a #8

screw or 1/4" bolt. When drilling pilot holes be sure that the holes