User's Manual
Table Of Contents
- 1 The Gallagher T20 Terminal
- 2 Before you begin
- 3 Distance between proximity readers
- 4 Installation
- 5 Connections
- 6 HBUS LED indications
- 7 Cardax IV LED indications
- 8 T20 Terminal products
- 9 Screen brightness
- 10 Information screen
- 11 Access control icons
- 12 Technical specifications
- 13 Terminal variants feature summary
- 14 Approvals and standards
- 15 Mounting dimensions
Page 11
3E3140 Gallagher T20 Terminal Installaon Note | Edion 16 | March 2016
Copyright © Gallagher Group Limited
Facia
Fit T10 Torx Post screw to
secure facia to base
Building cable
Terminal tail
Connecon
Base
9. Removal of the facia assembly is a simple reversal of these steps.
10. Congure the terminal in Command Centre.
If the terminal is connected as an HBUS device, refer to the topic "Conguring an HBUS
Terminal", "Conguring an HBUS Alarms Only Terminal" or "Conguring the PIV Card Reader" in
the Command Centre Conguraon Client Online Help.
If the terminal is connected as a Cardax IV device, refer to the topic "Creang Readers" in the
Command Centre Conguraon Client Online Help.
5 Connecons
HBUSConnecons
An HBUS terminal connects to one of the following devices:
• Gallagher Controller 6000
• Gallagher 4H/8H HBUS Module (aached to the Controller 6000)
• Gallagher HBUS Door Module (connected to a Controller 6000)
Refer to "HBUS Connecons" in the applicable installaon note, for details regarding HBUS terminal
connecons.
CardaxIVConnecons
A Cardax IV terminal connects to one of the following devices:
• Gallagher 4R/8R Reader Module (aached to the Controller 6000)