User's Manual

User Manual Gallagher SmartReader BR Series

Installing over a previous version

Ensure you install the most recent version of MyScale Pro each time you

purchase new hardware from Gallagher.

The InstallShield Wizard detects if you already have a version of MyScale Pro

installed on your computer. This will automatically be updated with this later

version of the software.

Note: Updating this version of MyScale Pro will retain the data previously

recorded and still enable full access to view and edit.

To manually start the installation, complete the following steps:

• Select Run from the Windows Start menu.

• Type d:\setup (where d is your CD Drive)

• Click OK.

Connecting the SmartReader to the computer

In order to view or alter settings on the SmartReader, you need to establish a

connection between the SmartReader and the computer.

To connect the SmartReader to a computer, complete the following steps:

1. Plug the supplied COM cable (RS-232 to RS-232) into the RS-232 port on

the SmartReader.

2. Plug the other end into the serial port on your computer.

Note: If your computer does not have a serial port, use the supplied RS-

232 to USB adaptor to connect to a USB port on the computer.