User's Manual

11
Screen
Operating Mode
There are two operating modes on the SmartReader HR3:
Memory mode• - The captured Electronic ID tag data is stored in the SmartReader in
sessions until it is transferred to computer using the MyScale Pro software. See the
MyScale Pro for SmartReaders Use Manual, and the above graphic.
Non-Memory mode• - The captured Electronic ID tag data is immediately sent out the
Serial port (via Bluetooth or cable) to a Scale or data logging device.
Memory counter
Applicable when in Memory mode only - Displays OFF when in Non-memory mode.
The Memory counter indicates the total number of Electronic ID tags stored in the
SmartReader regardless of the number of sessions involved.
The SmartReader HR3 can store up to 5000 Electronic ID tags. When it reaches 5000, the
counter is replaced with the word “FULL”.
EID tag number
Displays the full 16 digit Electronic ID tag number of the last read tag.
The fi rst 4 digits identify the country code or the manufacturer. The last 12 digits
identify the individual animal.