User's Manual

17
Setting up the SmartReader HR3
Depending on how you intend using the SmartReader HR3 you may need to set one or
both the following options:
the SmartReader operating mode, see • Selecting an operating mode (p 18).
the connection to Scale, see • Connecting to the Scale (p 20).
Via Bluetooth (wireless)•
Via cable•
Note: You can also connect to a computer or other data logging device.
See “Connecting the SmartReader to the computer” in the SmartReader HR
3
Confi gurator User Manual.
Operating modes
The SmartReader has two operating modes:
Memory Mode:
The captured Electronic ID tag data is stored in the
SmartReader in sessions until it is transferred to computer
using the MyScale Pro software.
If you are in Memory mode the following screen displays:
Non-Memory Mode:
If you are in1. Non-memory mode the following screen
displays:
The captured Electronic ID tag data is immediately sent2.
out the Serial port (via Bluetooth or cable) to a Scale or
data logging device.