User's Manual

8
Bluetooth to
USB device
Connected to the USB port of a computer and receives the tag data
sent by the SmartReader.
Receives the Bluetooth communications from the SmartReader and
passes the information onto a computer for deciphering.
(Note: This is not supplied, but is an optional extra.)
Tag Buffer A temporary storage area in memory for tag data.
Electronic ID
tag number
The Electronic ID tag number is the electronic code in an ear tag that
can be scanned to recognise an individual animal.
Antenna Contains the aerial used to capture Electronic ID tag data.
Activate the
SmartReader
Turn on the SmartReader ready for use. The screen turns on and
allows you to select various user options.
Double-Click Two quick successive clicks of the SmartReader trigger.
Memory
mode
The captured Electronic ID tag data is stored in the SmartReader in
sessions until it is transferred to computer using the MyScale Pro
software.
Non-memory
mode
The captured Electronic ID tag data is immediately sent out the Serial
port (via Bluetooth or cable) to a Scale or data logging device.
Read period The time the SmartReader is actively scanning for Electronic ID tags.
Once the read period ends the SmartReader antenna is turned off.
Default time is three seconds. This time can be altered. See the
SmartReader HR
3 Confi gurator User Manual.
Scale A digital weighing display unit that detaches from loadbars and
connects to your computer.
Scan for tags Turn on the SmartReader and single-click the trigger. This activates
the antenna and makes it ready to read Electronic ID tag data once
the tags move within the reader range.
Single-Click A single click of the SmartReader trigger.