User's Manual

14
3E3183 Gallagher HR5 Hand Held EID Tag Reader User Manual
Se ngs
The Se ngs screen is accessed directly from the Main Menu screen
and is a quick way to turn func ons On and Off using the arrow keys.
Se ng Op ons Descrip on
Backlight On* (5 minutes)
Off
Controls the backlight of the Reader. Time-
out period can be confi gured via APS.
Cont. Read Off *
On
Reader stops transmi ng once a single tag
is read.
Reader con nues to transmit following tag
read, allowing mul ple tags to be read.
Read Timer On*
Off
Determines  me allowed for transmi ng
a tag read: Con nuous Read - 5 minutes*
Non-Con nuous Read - 5 seconds*
Time-out period can be confi gured via APS.
Unlimited read  me. Time-out will occur
with power off  me-out
Vibrator On*
Off
A successful tag read is confi rmed with a
vibra on in the handle.
Beeper On*
Off
A single beep can be heard a er a successful
Electronic ID tag read.
Two beeps can be heard on a duplicate tag
read.
Time 10:03 AM The current  me is displayed. Select and
press OK to change the  me.
Date Y-M-D*, M-D-Y,
D-M-Y.
Select and press OK to set the date format
and date. Time and Date are used to create
Session names.
Zone NZL - NZST* Indicates the  me zone. Select and press OK
to change country zone and set  me and
date automa cally.
Changing Se ngs
1. Use the up and down arrows to scroll to
each func on to select it.
2. Use the le and right arrows to turn the
func on
On or Off .
3. For the Time and Date fi elds, select the
fi eld and press
OK. Use the fi eld arrows
to select the correct  me and date.
4. Press the Return key to save changes and return to Main menu.
Note: APS can be used to alter advanced  me-out se ngs. Refer to
the APS User Guide - Device Setup for further details.
*Default se ngs