User's Manual

17
3E3183 Gallagher HR5 Hand Held EID Tag Reader User Manual
POWER OPTIONS
When the HR5 is fully charged, it is expected to operate for 3-4
working days in typical yard applica ons.
Charge  me will vary depending on the capacity of the power
adapter and whether the reader is in use. Fastest charging is
achieved via the mains adapter when reader is off .
(Approximately 8 hours.)
The Reader will operate while being charged, however charging
will take longer while the Reader is in use with the backlight on.
Charging the Handheld EID Reader
The internal ba ery of the Reader can be charged using :
• a 5 VDC USB mains power adapter
• the 12 - 24VDC USB car charger included with the Reader
• a 12 V vehicle ba ery.
Connect the components needed (supplied with your HR5) for
your preferred charging method as shown below and plug into the
necessary power source for your charger.
USB Cable connector
5 VDC USB charger
USB car charger (12 - 24 VDC)
Standard 12 volt ba ery
12 V ba ery cable
USB Cable
Black Red