MICRO SE OWNER’S GUIDE
CONTENTS 4 5 6 7 8 9 10 INTRODUCTION OPTIONAL ACCESSORIES AND MOUNTS INITIAL SET UP DETAILED SET UP PLACEMENT OF SPEAKERS SPECIFICATIONS AND WARNING TECHNICAL SUPPORT AND WARRANTY 3
INTRODUCTION RUN-IN PERIOD Thank you for choosing Gallo Acoustics loudspeakers. Your Gallo loudspeaker utilises proprietary technologies that only reach their optimum performance levels after a period of 60 - 80 hours of use. During this run-in process the loudspeaker driver will loosen-up, the patented S2 fill material will settle, and your loudspeakers will develop the acoustic characteristics that are our signature.
OPTIONAL ACCESSORIES Available from your dealer, or directly from www.galloacoustics.com WALL MOUNT FLOOR STAND The Wall Mount is compatible with all Micro and A’Diva loudspeakers, and is available in Black, White and Stainless Steel finishes. Speaker cable can pass through the mount, allowing for a neat installation. The Micro Floor Stand is ideal for situations where a suitable mounting position cannot be acheived by wall or surface mounting.
INITIAL SET UP Please ensure that your amplifier is turned off before connecting the loudspeakers. When connecting speaker cables to your loudspeakers and amplifier, ensure that correct polarity is observed - red (+) terminal on the speaker to the red (+) terminal on your amplifier, black (-) terminal on the speaker to the black (-) terminal on your amplifier.
STEREO AND 2.1 MULTI-CHANNEL AND HOME CINEMA When using Micro SE loudspeakers in a stereo or 2.1 system, you must employ a suitable crossover or filter to ensure that only frequencies of 80Hz and above are sent to the loudspeakers. Attempting to playback lower frequencies can cause permanent damage to the loudspeaker and invalidate the warranty.
PLACEMENT OF SPEAKERS The placement of loudspeakers within a room can have a great effect on the sound of the system - small changes can make significant improvements. 8 • When speakers are placed on the included Isolation Ring, ensure that they sit near the front edge of the surface to prevent any diffraction effect, where the sound bounces off the surface itself. • The distance from the listening position to the loudspeakers should not be less than the distance between the speakers.
SPECIFICATIONS Frequency Response 100hz to 22khz Sensitivity 85 dB Nominal Impedance 4 Ohms Power Handling Crossover - 125 Watts Crossover None Driver 3” full range Dimensions 10.2cm (4”) diameter sphere Weight 735g Cone Material Aluminium Honeycomb Sandwich Enclosure Material Mild Steel/Stainless Steel Warranty 5 years WARNING Care must be taken when installing, mounting or standing this product to walls, ceilings or surfaces.
TECHNICAL SUPPORT WARRANTY Should you encounter problems using this product, please contact your dealer or local distributor. Anthony Gallo Acoustics Ltd warrants to the end user that this product will be free from defects in materials and workmanship in the course of normal use for a period of five years from the date of purchase.
BACKCOVER ANTHONY GALLO ACOUSTICS LTD THE INOX BUILDING CALDWELLSIDE LANARK SCOTLAND UNITED KINGDOM ML11 7SR WWW.GALLOACOUSTICS.