Instruction Manual

STEREO AND 2.1
When using Micro SE loudspeakers in a
stereo or 2.1 system, you must employ a
suitable crossover or filter to ensure that
only frequencies of 80Hz and above are sent
to the loudspeakers. Attempting to playback
lower frequencies can cause permanent
damage to the loudspeaker and invalidate
the warranty.
• Using speaker cables, connect the
speaker outputs on your stereo amplifier
to the high level inputs on the subwoofer.
• Run a second set of speaker cables from
the high level outputs on the subwoofer
to your Micro SE loudspeakers.
• On the subwoofer adjust the crossover
to around 100hz.
• When music is playing, you can adjust
the level control to match the subwoofer
and Micro SE loudspeaker volume.
Consult your subwoofer owner’s guide for
more detailed set up instruction.
7
MULTI-CHANNEL AND HOME CINEMA
When using a multi-channel surround
sound system, first ensure that you are
familiar with your amplifier’s functions, to
ensure that the correct mode and settings
are applied.
• Using speaker cables, connect the
speaker outputs from your AV Amplifier
to the Micro SE loudspeakers, ensuring
that each channel go to the relevant
Micro SE speaker.
• On the AV Amplifier, select a small
speaker setting, or manually set the
crossover point to approximately 100hz.
Consult both your subwoofer and AV Amplifier
owner’s guides for more detailed set up
instructions.