Installation Guide

ManualsBrandsGama Sonic ManualsLightingGothic 7" Tall LED Outdoor Pier Mount Post Light

Introduction

Thank you for your purchase! GAMA SONIC® solar accent lighting is a wonderful

addition to any outdoor space. GAMA SONIC® solar lights are brighter and last

through the night with a full solar charge. The unique designs, superior light

output and various installation options provide the outstanding value of our

product. GAMA SONIC® has been recognized as a worldwide leader in the

lighting industry for over 20 years.

Technical Assistance/Warranty Claims/Replacement Parts

Toll Free Number: +1-800-835-4113 (only within the US),

Email: support@gamasonic.com, or

Visit our website to download the latest version of your instruction manual:

www.gamasonic.com or www.gamasonic.com/user-guides

Please read the instruction manual carefully to obtain the best results from your

purchase.

GOTHIC SOLAR POST CAP LIGHT

Instruction Manual

Model: GS-143

Summary of content (4 pages)

PAGE 1
GOTHIC SOLAR POST CAP LIGHT Instruction Manual Model: GS-143 Introduction Thank you for your purchase! GAMA SONIC® solar accent lighting is a wonderful addition to any outdoor space. GAMA SONIC® solar lights are brighter and last through the night with a full solar charge. The unique designs, superior light output and various installation options provide the outstanding value of our product. GAMA SONIC® has been recognized as a worldwide leader in the lighting industry for over 20 years.
PAGE 2
Solar Light Location For optimum light duration throughout the night, it is very important to mount your solar light in a spot where it will receive the maximum amount of direct sunlight throughout the day. The optimum performance, allow for 2 days of full sun to charge. Fig. 1 Operation Instructions (Fig. 2 and Fig. 3) 1. Remove Part A from Part B by holding Part B in your hand and turning Part A counterclockwise. 2. Turn the operation switch to the LOW or HIGH position according to your preferences: a.
PAGE 3
Fig. 4 Assembly Instructions (Fig. 4) You can install the light using the Flat mount (Part C) or using the 4”/5” caps (Part D or E – sold separately) Installing the Flat Mount: 1. Locate the center of your surface and place the flat mount (Part C) allowing the locking wings to engage the post cap base. 2. Attached it using the 2 screws provided. Installing the 4” or 5” cap: 1. Attached the 4” or 5” cap (Part D or E) to your post according to the post manufacturer instructions.
PAGE 4
Replacing the Batteries (Fig. 5) After several years of use, the batteries may need replacing. 1. Remove the light from the post bracket by turning it counterclockwise. 2. Separate Part A from Part B by holding Part B in one hand and turning clockwise Part A with the other. 3. Unscrew the battery compartment’s door and remove the compartment door. 4. Unclip the battery connectors and remove the old battery. Make sure the new battery is a high quality – Li-Ion Battery pack (3.