Full Product Manual

Please read the instruction manual carefully to obtain the best results from your

purchase.

WARNING: GAMA SONIC® Light bulbs are built and designed for Gama Sonic products only.

They are not designed to be used in other electrical sockets. For the same reason, regular AC

and/or Low Voltage bulbs cannot be used in Gama Sonic products.

NOTE: If you are replacing an existing gas/electric wall light, you must consult a

certified technician to cancel them before installation.

Solar Wall Light Location

For optimum light duration throughout the night, it is very important to mount your

solar light in a spot where it will receive the maximum amount of direct sunlight

throughout the day. The solar light must be charged in full sun for two days in the

“ON” position for the best results.

NOTE: The following steps are for reference only. Consult your local hardware store

for the best installation method for your chosen surface.

Assembly Instructions:

Step 1:

Connect the plate to the wall bracket, align it with the

slots (Fig. 1). And secure the plate to the wall bracket

with provided screw.

Step 2:

The GS Solar LED Bulb is designed to last up to 10 years, however if it doesn’t work,

or if you want to use different color temperature bulb, it can be easily replaced.

Install the new GS Solar LED Bulb by turning into the bulb

socket clockwise (Fig. 2).

NOTE: Make sure to grip the light bulb by the base only and

NOT the glass lens (Fig. 3).

Fig. 1

Fig. 2

Fig. 3