Instruction Manual 3 MOUNTING OPTIONS PRAIRIE BULB SOLAR LAMP Part # 114B033, 114B333, 114B50833 US patents # 7172307, 9458970
Please read the instruction manual carefully to obtain the best results from your purchase. Thank you for your purchase! GAMA SONIC® solar charged lights are brighter and last all night with a typical solar charge. Unique design, superior light output and numerous installation options confirm the outstanding value of our product. GAMA SONIC® has been recognized as a worldwide leader in the lighting industry for over 20 years.
Assembly Instructions Operation Instructions 3” Pole/Fitter Mount 1. NOTE: If you are replacing an existing gas/electric post light, you must consult a certified technician to properly disconnect and secure the gas/electric connection. 1. Attach the 3” fitter (C) to the fixture (B) using the bolt and secure from inside the fitter (C) using the lock washer and nut. 2. Place the fitter (C) on top of the 3” post and secure using the 3 screws provided. 2. 3. 4. 5.
Replacing the battery 1. 2. 3. 4. 5. 6. 7. 8. 9. Remove the top (A) from the lamp by removing the two screws. Switch the lamp to the OFF position and remove the bulb. Remove the battery compartment cover that is held in with a screw. Remove and unclip the old battery. Make sure the new battery is a high quality Ni-MH 3.6V/800mAh battery (Item GS36V08) Clip the battery in and place the battery in the compartment. Reinstall the battery compartment cover and screw.
