Full Product Manual

3
Operation Instructions
1. Remove the top (A) from the fixture (B) by removing the 2 screws as shown in
Fig. 1.
2. Turn the operation switch (Fig. 2) to the ON position, and the solar lamp will
automatically operate from dusk to dawn.
3. Reattach the top (A) to the fixture (B) and secure with the 2 screws.
Installation Instructions
Note: For best results, position your lamp so it is facing south.
Use a drill to make two holes in the wall, place appropriate hardware into holes.
Place the wall bracket in line with the holes and secure bracket to wall with the screws
provided (Fig. 3).