Installation Guide

Visit our website or download the latest version of your instruction manual:

www.gamasonic.com or www.gamasonic.com/user-guides

WARNING: GAMA SONIC® Light bulbs are built and designed for Gama Sonic products only.

They are not designed to be used in other electrical sockets.

For the same reason, regular AC and/or Low Voltage bulbs cannot be used in Gama Sonic

products.

1. Solar Lamp Location:

For optimum light duration throughout the night, it is very important to place your solar

lamp in a spot where it will receive the maximum amount of direct sunlight throughout the

day.

NOTE: For best results, the solar lamp post must be charged for two sunny days in the “ON”

position.

2. Assembly instructions

NOTE: The following steps are for reference only. Consult your local hardware store

for the best installation method for your surface.

Assembly Instructions:

1. Slide the finial Part (A) on top of Part (B), secure it with the set screw

using the provided Allen wrench.

2. Install GS Solar LED Light Bulb into Part (B)

3. Attach Part (B) to Part (C) and secure it with the provided screws and nuts

4. Screw the pole Part (D) into the base Part (F)

5. For GS-178S model only: Screw the additional two poles Part (D) to

each other

6. Screw the fitter adapter Part (E) into the pole Part (D)

7. Slide Part (C) on top of Part (E), secure it with the set screw using the

provided Allen wrench.

Fig.1