Introduction Thank you for your purchase. GAMA SONIC® solar charged lighting eliminates the problems associated with most solar lighting available today. GAMA SONIC® solar charged lights are brighter and last all night with a typical solar charge. Unique design, superior light output and numerous installation options confirm the outstanding value of our product. GAMA SONIC® has been recognized as a worldwide leader in the lighting industry for over 20 years.
1. Place the frame only (A) in your desired location. Mark the two holes for the screws. Remove the frame and drill the two holes. Place the screw anchors inside the holes, and secure the screws through the frame. 2. Insert the lens by sliding it into the frame (B) make sure the White wall cover is placed at the back of the lens. 3. Screw the GS Solar LED Light Bulb into the top. Make sure you handle the bulb from its base and not the glass (Fig. 2) 4.
. Replacing the Battery (After several years of use, the battery may need replacing.) 1. Unscrew the two screw caps and detach the cap. 2. Make sure the ON/OFF switch is in the OFF (O) position. 3. Unscrew and open the battery compartment (Fig. 5) located on the silver reflector. 4. Unclip the connector and remove the old battery. (Fig. 3) 5. Make sure the new battery is a Gama Sonic – 3.2V/1,500mAh, Li-ion Rechargeable Battery with a connector. 6.