Instruction Manual Solar Flood Light Model: GS-203, GS-203-WW Version 1.
Please read the instruction manual carefully to obtain the best results from your purchase. Thank you for your purchase. GAMA SONIC® solar charged lighting eliminates the problems associated with most solar lighting available today. GAMA SONIC® solar charged lights are brighter and last all night with a typical solar charge. Unique design, superior light output and numerous installation options confirm the outstanding value of our product.
Our GS-203 model boasts multiple installation options. These instructions will explain how to assemble the different pieces to each other. Please use this as a guide and choose the mounting option/combination that works best for your situation. Step 1. Mounting Bases to lamp and/or solar panel This product comes with two stake mounts (Part D) and one flat mount (part E). Choose the one(s) that fit best for your desired mounting location. 1. Part A can be attached to Part F (Fig. 1) or G (Fig.
Fig. 4 7. Connect the solar panel and the lamp head cords together and secure using the screw connector. An extension cord is included and can be used to mount the solar panel further away from the lamp. (Fig. 4) Step 2. Mounting Solar Panel to Lamp This product has the option of mounting the solar panel directly to the lamp in either a forward or rear facing direction. Please follow the below steps if you desire the panel to be attached to the lamp. 1.
2. Mounting with solar panel facing the opposite direction as the lamp. a. Insert Part A into the groove at the bottom of Part F with the tapered end of the wedge going into the lamp (Fig.9). NOTE: Push the part into the groove firmly so it does not easily slide out. (Fig.10) b. Attach Part A to Part C and secure with screw cap (Part H). (Fig. 11) c. Insert Part C into the groove at the top of Part G with the tapered end of the wedge going into the panel (Fig. 8).
Replacing the Batteries Replacement batteries are available at www.gamasonic.com or via our Toll free number: +1-800-835-4113 After several years of use, the battery may need replacing. 1. Make sure the ON/OFF switch is in the “OFF” position (0). (Fig. 12) 2. Unclip the battery connectors and remove the old batteries. Make sure the new batteries are high quality – 2 Li-Ion Battery packs (3.7 Volt /4,000 mAh) with matching connector. 3. Install the new batteries into the battery compartment. (Fig. 13) 4.
