Instructions / Assembly

ManualsBrandsGama Sonic ManualsOtherVictorian Solar White Outdoor Post/Wall Light with Bright White LEDs

Introduction

Thank you for your purchase. GAMA SONIC® solar charged lighting eliminates the

problems associated with most solar lighting available today. GAMA SONIC® solar

charged lights are brighter and last all night with a typical solar charge. Unique

design, superior light output and numerous installation options confirm the

outstanding value of our product.

GAMA SONIC® has been recognized as a worldwide leader in the lighting industry for

over 20 years. The company also offers unique products from multi-purpose solar

lamps to emergency lighting products.

For technical assistance and more information call our Toll Free number:

800-835-4113 (only within the US) or visit our website at: www.gamasonic.com.

Please read the instruction manual carefully to obtain the best results from your

purchase.

Tools that are needed but not supplied with the solar post lamps are: a screw driver

and a power drill.

Solar Lamp Location:

For optimum light duration throughout the night, it is very important to place the solar

panel in a spot where it will receive the maximum amount of direct sunlight

throughout the day. Also, for best results install your solar panel facing the south.

VICTORIAN

SOLAR LAMP

US Patent # 7172307

Instruction Manual

Model: GS-94FPW

Summary of content (4 pages)

PAGE 1
VICTORIAN SOLAR LAMP US Patent # 7172307 Instruction Manual Model: GS-94FPW Model: GS-94FPW Introduction Thank you for your purchase. GAMA SONIC® solar charged lighting eliminates the problems associated with most solar lighting available today. GAMA SONIC® solar charged lights are brighter and last all night with a typical solar charge. Unique design, superior light output and numerous installation options confirm the outstanding value of our product.
PAGE 2
Assembly and operation Instructions (Fig. 1 and Fig. 2) E Fig. 1 A B C D NOTE: The following steps are for reference only. Consult your local hardware store for the best installation method for your particular surface. GS-94P (Post Mount) 1. Use an electric drill to make four holes in the desired surface. Place provided anchors into holes, place the base of the lamp (C) in line with the holes and attach with the provided screws. 2.
PAGE 3
2. Screw Part (A) into Part (B) and turn the Low/Off/High switch located on the lamp head (E) to Low or High position according your preferences (Fig. 2). Fig. 2 Fig. 3 Replacing the Batteries (Fig. 3) (After several years of use, the battery may need replacing). 1. Detach the top of the lamp unit (E) by releasing the 2 screws. Make sure the Low/OFF/High switch is in the OFF (O) position. 2. Unscrew the battery compartment screw. 3. Unclip the connector and remove the old battery.
PAGE 4
Maintenance Clean the solar module regularly with a damp towel to guarantee optimum performance of the solar panel. Do not use any type of solvent for cleaning and be careful not to put too much pressure on the module while cleaning. Trouble Shooting If your solar charged light does not come on at dusk despite observance of all the instructions, please try the following steps: 1. Make sure that the solar light is not being affected by any other light source. 2.