User Manual

ENSURE THAT YOU ARE NOT DRILLING INTO ANY TUBES, WIRES, ETC.fasteners.
9. For even more stability, it is recommended that bolts, nuts and fender washers (NOT INCLUDED)
be used to fasten the base using the four holes on the surface that rests on the surface of the
passenger's side floor. Drill completely through the floor of the vehicle and attach the necessary
•The components added to the Chevy Impala Vehicle Base should not be positioned in the area where the
airbag may be deployed if it is activated.
•DO NOT position the equipment in front of an airbag. Equipment positioned in front of an airbag may cause
serious injury or death if an airbag is activated.
•High speed vehicle turns may cause the moving parts of the assembly to swivel, interfering with the driver or
other equipment.
•If installation of the equipment requires that the equipment be placed in front of an airbag, the airbag should
be deactivated. In order to secure permissoin for deactivating the airbag you must contact the National
Highway Traffic Safety Administration at 1-800-424-9393. If you have any questions or need assistance, call
Gamber-Johnson at 1-800-456-6868.