User Manual

ManualsBrandsGamber-Johnson ManualsComputer Accessories7160-0082

7160-0082 - Large Workstation

7160-0083 - Computer Mounting Platform for Large Workstation

7160-0081 - Vertical Surface Mount

7160-0104 - Large Workstation w/Computer Mounting Platform

7160-0105 - Large Workstation w/Vertical Surface Mount

INSTALLATION INSTRUCTIONS

Product Revision Form #

If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868

Large Workstation and Options

Rev. B

INST-359

Product Mounting Disclaimer

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage

of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson

products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

The Workstation provides lockable storage for supplies and equipment.

A removable Clipboard/Storage Pocket is mounted on the exterior and can be repositioned

to either side.

Removable brackets allow Letter size hanging folders to be supported inside the

Workstation. Hanging Folder Brackets can be repositioned inside the Workstation allowing

folders to hang front-to-back or side-to-side.

Wiring access cutouts allow electronic and charging devices to be installed inside the

locked Workstation.

Carrying cutouts on sides aid in moving and installing the Workstation.

The Workstation weights approximatly 60-70 lbs, use caution when moving and installing.

The Workstation is typically installed between the driver and passenger seats with the

Clipboard/Storage Pocket toward the rear of the vehile.

This allows a computer mounting bracket (7160-0083 or 7160-0081) to be installed toward

the vehicle dash.

1 of 4

FIG. 1

7160-0082

Large Workstation

Wiring Access

Cutouts

Clipboard/Storage Pocket

Mounted on End or Sides

Carrying Cutouts

Hanging Folder Brackets

Summary of content (4 pages)

PAGE 1
INSTALLATION INSTRUCTIONS Product Revision Form # Rev. B INST-359 Large Workstation and Options 7160-0082 - Large Workstation 7160-0083 - Computer Mounting Platform for Large Workstation 7160-0081 - Vertical Surface Mount 7160-0104 - Large Workstation w/Computer Mounting Platform 7160-0105 - Large Workstation w/Vertical Surface Mount The Workstation provides lockable storage for supplies and equipment.
PAGE 2
There are three ways to install and attach the Workstation to the vehicle floor. Two require drilling holes into the vehicle floor, the third uses the existing seat bolts: #1 - The box alone, without Adjustable Legs, can be attached to the vehicle floor. Mounting holes are provided in the bottom of the Workstation (see Fig. 1). #2 - The Workstation can also be attached to the vehicle floor using the Adjustable Legs (see Fig 2).
PAGE 3
FIG. 2 7160-0082 Large Workstation w/ Adjustable Legs Large Workstation (4) .38-16 x .75 Hex Head Screws (4) .38 Flat Washers 2.5" Adjustment Adjustable Legs Adjustable Leg Mounting Holes Bolt to vehicle floor with .38 dia, grade 5 hardware FIG.
PAGE 4
7160-0083 Computer Mounting Platform - This accessory is attached to front surface of Large Workstation with (6) .25-20 Phillips SEM Screws. Hole pattern on top surface, allows mounting a Gamber-Johnson Clevis or Articulating Arm motion attachment. A computer can then be attached using a Gamber-Johnson Cradle or Docking Station. 7160-0104 Large Workstation with Computer Mounting Platform - This assembly is the complete Large Workstation with Computer Mounting Platform attached.