Owner manual

Attaching the keyboard mount to the mounting surface:

1. The keyboard mount has a tilt/mounting bracket that allows for mounting the support on

any flat surface ranging from horizontal to vertical. Attach the tilt/mounting bracket using

1/4-20unc hex bolts, washers, and nuts that were provided in hardware bag 7120-0232.

NOTE: The bolt provided may be to long or short for your application. Should that

condition occur please substitute an appropriate length which can be purchased at any

hardware store.

Cover Bracket

#6-32unc Mounting Hardware

Mounting flange for

vertical to 45

mounting surfaces

Mounting flange for

horizontal to 45

mounting surfaces