User's Manual

7160-0073: Work Table Wedge

The CF19 work table wedge has rubber pads to provide a mobile slip free mounting surface. Four .281

square holes on the bottom surface allow mounting the work table wedge permanently to a surface if

required. See drawing for mounting hole location.

(Mounting Hole Location)

4X .281

Holes

.31

7.19

.519.41

.25-20 x .75 HHCS

6 0F 7

CF19 Accessories

7160-0049: CF19 Screen Support

Use two #8-32 x .38 long socket head screws and

two #8 flat washers to attach the screen support to

the back side of the CF19 Dock as shown.

Screen Support

#8-32 X .38 Screws

and Flat Washers