User's Manual

7160-0215: LED Assembly
Position the LED assembly over two holes in the
back cover, and attach using the #6-32unc x .38
screws that were provided with the LED assembly.
The LED is powered using the red and black wires
on the back of the light base. The LED Assembly
is designed to operate on 12volts DC.
In a negative ground vehicle:
Connect the RED wire to the positive pole of the
vehicle battery or power distribution box. It is
recommended that a user-supplied fuse holder and
1 amp fuse be installed on red the wire. Connect
the Black wire to a suitable chassis GROUND or
the NEGATIVE pole of the battery.
Turn on the LED by pressing the Activation
Button on the head of the LED Assembly.
The LED has three light options: White,
Red and White/Red. Press the Activation
Button to toggle through the options.
Hold the Activation Button down for
approximately one second to turn the LED
off.
#6-32 x .38 Screws
LED Assembly
Activation Button
7 0F 7