Owner's manual

ManualsBrandsGamber-Johnson ManualsComputer Accessories7160-0277

INTERFACE PLATE, CF-19

INSTALLATION INSTRUCTIONS

Product Revision Form

If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868

7160-0277

Rev.B

INST-497

Product Mounting Disclaimer

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage

of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson

products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

Printing Spec: PS-001

The CF-19 Interface Plate allows a Gamber-Johnson CF-19 docking station (7160-0207) to be

attached to the Universal Display Mount (7160-0272, 7160-0273). Refer to the installation

instructions for the Universal Display Mount for additional installation instructions.

Insta

llation:

1. Following the diagram below, install the CF-19 dock to the Universal Display Plate using

the hardware provided.

2. Using the supplied hardware, install the Plate into the slots in the Universal Display Mount.

3. Adjust the computer to the desired height and tighen the four bolts holding the plate in.

4. Finish installation following the installation instructions provided with the CF-19 docking

station.

(4) 1/4-20 x .50

HEX HEAD BOLTS

(4) 1/4-20 x .50

HEX HEAD BOLTS

(4) 1/4-20 x .50

HEX HEAD BOLTS

& WASHERS

(4) HEX STANDOFF/COUPLINGS

INTERFACE PLATE

CF19 DOCK/CRADLE