Datasheet

Placement Tilt Swivel Weight Height Width Depth
Attaches to rectangular forklift
support braces 1.5" to 2.5" wide
Yes - Both Clam Shells
up to 160°
Motion Attachment - 360°
Entire arm - 360°
7.47 lbs. 10.08" 7.43” 9.96”
Secondary Clam Features:
• Heavy gauge steel construction for long-term durability in a rugged environment
• Black powdercoat  nish for maximum corrosion resistance
• Clam Shell features the following hole patterns: AMPS, NEC and 75mm VESA
• To tilt the Clam Shell simply loosen the adjustable lever, tilt to desired position and then re-tighten the lever
• A secondary bolt is included to lock the clam shell into a permanent position
Small Plate Features
• Heavy gauge steel construction for long-term durability in a rugged environment
• Black powdercoat  nish for maximum corrosion resistance
• Clam Shell features the following hole patterns: AMPS, NEC and 75mm VESA
• The Clam Shell can be tilted up or down for a total of 160°
• To tilt the Clam Shell simply loosen the adjustable lever, tilt to desired position and then re-tighten the lever
• A secondary bolt is included to lock the clam shell into a permanent position
• Plate sandwiches the forklift support brace and allows user to position the device at the desired height position
D
W
H
Item No. 7160-0420
EXCEPTIONAL ENGINEERING | ROCK SOLID | EXTENSIVE TESTING
3001 Borham Ave. | Stevens Point, WI 54481, USA
Phone: [phone] | Toll-free: 800.487-9220 | Fax: [phone]
Email: [e-mail] | Website: www.gamberjohnson.com
This document, including images, may not be reproduced partly or fully without the expressed written
consent of Gamber-Johnson’s Marketing Department. © Copyright 2012 Gamber-Johnson LLC
FORKLIFT MOUNT:
FORKLIFT MOUNT:
DUAL CLAM SHELL WITH ARM AND SMALL PLATE
DUAL CLAM SHELL WITH ARM AND SMALL PLATE
NEW