User Guide

Navigation Display
The Navigation Display has two modes; Waypoint and Map. Press M to toggle
between these two modes.
In Waypoint mode, the Navigation Display lists the following information:-
WAYPT - waypoint currently being tracked by the navigation system.
BEARING - the bearing along which you must travel to reach the waypoint.
RANGE - the distance to the waypoint.
DEPTH - the depth of the waypoint.
TIME - the elapsed mission time (you will be told in the briefing if you
have a set time to complete the mission).
CLRNC - the clearance between the seabed and your sub. If you get within
100 feet of the seabed, this readout will change from yellow to red.
In Map mode, the Navigation Display shows a map of the immediate terrain with
your sub in the centre. As on the HUD, all objects are colour coded:-
Yellow - your sub Blue - friendly object
Red - enemy object Green - neutral or unknown object
Instruments
The Instruments consist of three rows of figures:-
The top line shows your current heading in degrees. The direction you must turn to
reach the currently selected waypoint is also shown, as arrows to either side of the
heading readout.
The second line shows the speed of your sub in knots, followed by your throttle
setting (between 0 and 120).
The last line shows your current depth in feet.
23
GAME MANUAL
SW Eng GP man 11/12/97 10:31 am Page 23