User Guide

If you are using a DUALSHOCK
®
2 analog controller, you can turn the Vibration ON/OFF
from the Options Menu (see page 7).
CONTROLLER
3
Set up your PlayStation
®
2 computer entertainment system according to the
instructions in its Instruction Manual. Make sure the MAIN POWER switch (located on
the back of the console) is turned on. Press the RESET button. When the power
indicator lights up, press the OPEN button and the disc tray will open. Place the
Samurai Jack™: The Shadow of Aku disc on the disc tray with the label side
facing up. Press the OPEN button again and the disc tray will close. Attach game
controllers and other peripherals, as appropriate. Follow on-screen instructions and
refer to this manual for information on using the software.
Memory Card (8MB)(for PlayStation
®
2)
To save game settings and progress, insert a Memory Card (8MB)(for PlayStation
®
2)
into MEMORY CARD slot 1 of your PlayStation
®
2. You can load saved Samurai Jack:
The Shadow of Aku game data from the same memory card or any memory card
(8MB)(for PlayStation
®
2) containing previously saved games. A minimum of 313KB is
required to create a System File.
GETTING STARTED
MEMORY CARD slot 1
MEMORY CARD slot 2
USB connector
controller port 1
controller port 2
disc tray
RESET button
OPEN button
button
button
button
button
directional
buttons
left analog stick
(L3 button
when pushed down)
SELECT button
ANALOG mode button
START button
right analog stick
(R3 button
when pushed down)
L2 button
L1 button
R2 button
R1 button
DUALSHOCK
®
2 ANALOG CONTROLLER CONFIGURATIONS
2
SamJack_PS2_manual2.qxd 1/22/04 12:22 PM Page 2