User Guide

KEEP TRACK OF MISSION OBJECTIVES

Each mission has objectives established by SOCOM prior to deployment. Track the

status of each mission objective here. The original objectives match those you see

during the Mission Briefing, but additional objectives can be added.

• Select an objective and press

x to view an intelligence movie of the objective

location with a brief set of orders.

• A checkmark appears next to completed objectives.

• Failed objectives are grayed out.

Use the TacMap to navigate the area and keep

track of the mission specifics. Press

w to open the

TacMap/Mission Objectives screen. The Tactical Map

and Mission Objectives contain all current objectives

and intelligence about the operational area.

USING THE TACMAP

• Press the left analog stick to move the

map view.

• Press the right analog stick

1/2 to zoom

the map.

• Press

d to review the legend which shows

key map symbols.

• Press

c to center your view.

Your Positions

You appear on the map as a cone of light with a circled letter A (Able Element), just

as if you were shining a flashlight in the direction you are facing. Bravo Element

appears as the circled letter B.

Mission Path

Follow the green line to complete the mission as planned. The path is created

based on known objectives. A mission path will not be available for every objective

or mission.

Nav Points

Nav Points mark key locations within the op area. Use these geographical reference

points to issue commands. See “Using Nav Points” for more info on commands.

Structures

Move through the op area using these as navigational aids.

TACMAP AND TRACKING

MISSION OBJECTIVES

Mission path

Your position

Nav points

Structures

SOCOM2 manual_rev1.qxp 10/30/03 4:23 PM Page 18