User Guide

23
22
PAINT MODE ICONS
PAINT/TEXT MODE ICONS
TIP! Use L and R to:
L Fine spray (paint/erase)
R Large spray (paint/erase)
To save graffiti you need the following amount of memory blocks in
your memory card:
Small: 18 Max Large: 34 Max X-Large: 66 Max
Spray graffiti! The color palette will be displayed. Use the D-Pad
to select a color then the Analog Thumb Pad to move the cursor.
Press L/R to spray. Press A to enter.
Select to display the Eraser. You can also display the eraser by
pressing X. Once the eraser is displayed, use the Analog Thumb
Pad to move the cursor and press the
L/R to erase. Only the
painted portion will be erased, not the text. Press A to enter.
Press A to erase all the paint.You will be asked to confirm your
selection. Use the D-Pad to select either “OK” or “NO” and press
A. Only the painted portion will be erased, not the text. It will not
be possible to undo this step so be careful.
Zoom in on the graffiti. Use the D-Pad to select “x1,” “x2” or “x3.”
Press A to enter.
Select whether to spay paint over the text or under the text.
Select “Over” and you’ll spray over the top of the text.
Don’t forget to save once you’ve finished or your graffiti will be
lost! Select and enter “Save” to display the save confirmation
prompt. Use
$^ to select “OK”. Press A to display the Save
Screen (p.24). Once the Save Screen is displayed, it won’t be
possible to edit your graffiti anymore.
Go to text mode (p.20).
Palette
Eraser
Total Erase
Zoom
Paint Over/Under
Text Mode
Save
JET G RADIO5 00.8.31 6:44 PM Page 24