User Manual

ManualsBrandsGameSir ManualsAccessoriesBluetooth 4.0 and 2.4GHz Wireless Gamepad Mobile Game Controller for Android/PC / PS3/ SteamOS

The Android devices can also be connected if you press “ ” and “ ” button simultaneousely.

The function of “ ”+“ ” and “ ”+“ ” mode is totally the same, the first difference for those two

modes is that few Android Smartphones can only recognize “ ”+“ ” mode. Most other Android

Smartphones can recognize both “ ”+“ ” and “ ”+“ ”. The second difference is that, if you

want to get the icon of mouse appears on your screen, you need to press “ ”+“ ” at first, press

“Select”+“ ” after that. You can not get the icon of mouse after you press “ ”+“ ”.

Please note that the controller will remember your last connection ,if this is your second time to connect

T1s to the same Android Phones, and your T1s is not been connected to other devices between the first

time and the second time, there is no need to turn on the Bluetooth again for the second time, hold down

the “ ” button of your T1s for 3 seconds, the controller will be paired automatically.

Open up a compatible game, navigate to the in-game controller settings menu and select the

Gamepad/Controller option (Exact name varies from game to game). If the game supports remapping, feel

free to do so from the in-game controller settings menu. If you do not know if the game is controller

compatible, go to www.gamesir.hk and find “GameSir World” column.

If this is your first time turning on your T1s, hold down the “ ” button and “ ” button simultaneously

for 2 seconds, the “ ” button will start flashing in green. It means that the controller is ready to be

connected to your Android Tablets or Phones. To pair the controller, go to your Android devices and follow

the User Interface flow below: Settings>Turn on Bluetooth>Search for new devices>”GameSir-T1s” will

display on the screen. Click to connect via Bluetooth. If your T1s is paired and connected, the T1s will

shock slightly and the “ ” Button will stay on green. The “ ” button will start flashing in red, when you

hold down”Select” and “ ”, the mouse icon will appears on your screen, and the Mouse button will stay

on.

Before getting started, check the remaining power of your T1s at first, press the “Home” button next to the

L2 button of your T1s, the four blue LED lights will flash in turn and each LED light represents 25% of the

power. If your T1s is not fully charged, we recommand that charge your T1s to full at first.

It is recommanded that charging the controller for 2 hours by

plugging in the USB cable( provided in the box) –plug one end

of the cable in your T1s and plug the other end into a powered

USB port. Remember, you can use your T1s while it’s charging,

but it is not recommanded.

If you want to turn off the gamepad, press the

“Home” button for 5 seconds.

Your T1s controller is built with a Lithium Ion rechargeable

battery. During charging, four LEDs will give you the charging

status:

While the T1s controller is charging, the four blue lights will flash

in turn.

When the T1s is fully charged, the four blue lights will stay on.

CHECKING AND CHARGING THE CONTROLLER CONNECTING ON ANDROID ( TABLETS / PHONES )

B+HOME

A+HOME

HOME

HOME HOME

HOME

Brightness adjustment of “XYAB” button lights

When your T1s is connected successfully to any of your devices, hold down “L2+R2+R3” simultaneously,

and press UP/DOWN button of D-Pad to increase/ decrease the brightness of “XYAB” buttons. There are

4 levels of brightness degree in total.

Auto fire function

TURBO is semi-automatic, it creates one or more continuous button press.

T1s HIGHLIGHT FEATURES

GameSir-T1s