Instructions

GAMMA
How to Install Cold Shrink Tubing
GammaElectronics.netPage 2 of 3
2. Place the Cold Shrink Over the Cable
Put the cable you wish to protect through the cold shrink, before you tighten the cable into place.
3. Fully Tighten Your Connection into Place
You want the connection fully installed and tightened. As soon as you install the cold shrink it is intended to be a
permanent installation that is only removable by cutting it o.
4. Move the Cold Shrink Up the Cable & Over the Connection
Move the cold shrink up and over the connection to make sure it fully covers the connection. You want it in the
correct position as soon as you pull the rip cord and remove the cold shrink’s plastic inner core.v