Instructions

GAMMA
How to Install Cold Shrink Tubing
GammaElectronics.netPage 3 of 3
5. Slowly Pull the Rip Cord
As soon as you start to pull the rip cord the perforated plastic core will begin to pull away at the top of the cold
shrink tubing. Where the cold shrink first grabs hold is a crucial step in the installation process. As the plastic core
at the top pulls away you will likely want to slightly adjust the position of the cold shrink so it shrinks down at the
right spot.
6. Continue to Pull the Rip Cord
As soon as the first bit of cold shrink has shrunk down to the spot of your choosing, simply continue to pull the rip
cord until the inner plastic core is fully removed from the rubber cold shrink tubing.
7. You Are Done
Congratulations, you’re done! You now have
IP68 rated weather protection over your
connection.